Viewing all customer Discussions for:

55-008 3' WT Snap-in

Attached are pictures of the vinyl bead glazing for Quaker aluminum single hung single strength glass built around 1987. We have nearly 500 of these windows. Thank you greatly for your help.Russ

is this item availabe to purchase

I have 5 windows that need a replacement leaf weatherseal. I included the dimension on the photo. I cannot find a manufacture of the window. It may be Mercer because I live in Oregon. I would accept a plastic substitute.

Ordered the glazing, (order # 1412010) it is not wide enough and a bit too angled. The photo with 2 pieces os the old and new together

I am trying to identify glazing that matches the current glazing. I need to order some, as I have had the glass replaced in 9 windows and the glazing basically crumbled because of exposure to the heat and sun. The window company does not order glazing but will install it for me....ugg! I didn't real ... (cont.)

Hi. I'm not sure which size I need to get. Can you help? Thanks!

Will this ups easy enough?window is 65" long by 12" deep. 1/2" double pane. from the Aluminum plant shelving window at least 30 years old. Brown.Also have several aluminum sliding window made by Belknap. Double panes were installed at one time need the plastic latch that slides up and down to loc ... (cont.)

I will be ordering approximately 20 window lifts. In addition, I need to replace brackets, sections of mullions (spelled incorrectly in attachment) and plastic edging that snaps into the mullions. I prefer if the mullion material and plastic edging can be purchased as long pieces that can be cut t ... (cont.)

The retainer strip of the storm door has come out. I did not see any clip holding the retainer strip. The current strip does look like the one that you push in to snap in place. Where can I get a retainer strip? I am sending you the picture of the retainer strip. Thx Satyajit

This is the snap-in piece of the top window, inside, bottom piece. This is the piece that also holds the inner locking mechanism. Thank you, Craig

can you please help? we don't know the brand of our windows but this is what we need. we think that its about 11mm by 7.5mm. Your help will be very much appreciated. thank you julita

Trying to figure what part # this is. Have no idea the brand of window. Thanks!

grey in color, on aluminum windows, house built in 1964 I have been to two of the bigger glass companies in town and they dont have it at all.

I'm replacing glass panes in several basement windows and they all have vinyl glazing bead like what is in the picture. Can you match this up with something that I can use to replace the beading? Thanks..

Looking to replace glazing bead. This came from a PGT single pane window. Demensions 5/8 by 1/4 by 1/8. This bead is aluminum but would prefer to replace with vinal.

Hello,I need some assistance identifying and also seeing if you carry this Alenco snap-in window glazing material. I drew an illustration of the profile as well in case you had issues seeing it in the actual photos.ThanksJae

Our community has allowed us to remove the mullions on our windows. I have 3 of the same size windows and after I removed the mullions I realized the plastic strippings on all 3 windows will need to be replaced. Do you have the replacements? Do you have a how to video? Lastly any suggestions on how ... (cont.)

Looked at capital was close in size and shape

Can you help me ID this snap in glazing?

I am looking for window glazing for single pane aluminum frame windows that is 1/2" by 3/8". The current is grey but any color with same profile or a profile that will work is fine as we are redoing all of the windows..