Viewing all customer Discussions for:

10-109 7/8" Flat Shower Door Wheel

I have a frame less glass shower door that need replacemnt rollers for. The roller has a 1in o.d, convex or oval profile, has an S626Z bearing and takes a #8 machine screw to mount.

Looking to replace these, our shower doors are old but still in good shape besides these rollers

Looking for a replacement for this roller. Any help is much appreciated.

Roller fell off,need replacement for kitchen cabinets. I have six drawers using the same slide,should have spare parts! Are the rollers available? Roller Dim 1/4"thick X 15/16 Dia ball bering. Cabinet Mounting is 22.7/8" Drawer Mount is 19.3/4" Actual Dimensions this is a 20" Drawer ... (cont.)

I looked through your catalog, your stock roller is 1"() x 0.25" (7mm). I need any roller mechanism with a 22-23mm outer diameter and 8.5-10mm thickness/width. I attached a photo of what I have with the current dimensions noted in the photo itself. My cabinet door will not stay in the track with t ... (cont.)

i need replacement drawer rollers - 12 large ones and 12 small ones. they go in a (45-50 year old) 4 drawer office cabinet made by steelcase (i think). i have included measurements (using a digital caliper) of the rollers. they are similar to SWISCO item # 32-039. however, the item # 32-093 do ... (cont.)

I need 8 bearings to replace the broken one in the photo above. The roller is 7/8 inch in dameter, the nylon roller is 1/4 inch thick, The entire bearing is .455 inches thick and the screw I believe is an M4. The screw is .475 inches in total length, .16 inces in diameter and the threaded portion is ... (cont.)

I'm trying to identify these closet door rollers. The bearing in them is completely worn. I haven't been able to identify any manufacturer or dates, but they are original to the house built in late 1960's.

Hi, seeking assist for IDing these RPL hardware please :)

Looking for something similar

needs

Hello, First THANK YOU(!) for this service as there seems to be a million door component parts and parts manufacturers. As noted in the Subject, the parts noted in the attached pictures are for a sliding wardrobe / closet door. Note this door has a full width and height mirror and I mention this d ... (cont.)

Need a set of replacement for these

Hi - looking for guidance on how to remove the wheels and replace them... and replacement parts - I hve 4 doors so I need 8 new wheels Trish

Door made in china. Curved track. Single plastic roller around 1 inch diameter. Single roller attached to swivel/twist to follow the curved track. PLEASE help!

Hello. The roller wheel on my pots pull out drawer broke. Here is photo of intact side. Do you have the whole piece that I need? Thank you.

Need replacement shower door roller. Looked everywhere and could not find anything.

All the drawers and roll-out shelves in my kitchen base cabn'ts are mounted on Grant drawer guides-(3/4" extension). Date of purchase of the pre-assembled cabn't units is 1967. The nylon roller on one of the guides broke today (11/25/2013) and all the ball-bearings fell out. The axle of the rol ... (cont.)

Hello, I have a 20 inch drawer slider, that the roller has broken off the part of the slider attached to the cabinet frame. I tried to replace the whole slider, but the drawer portion of the slider is incorporated with the sides of the drawer, so can't be replaced, and did not match the new slider. ... (cont.)

Roller dia 19 mm c 6 mm thick, And 12 mm dia x6mmthick