Viewing all customer Discussions for:

26-244A Tilt Window Latch, Right Hand

I need to replace a broken balance in my window. Attached are the photos. Please let me know which part should I order?

tape measure ref for size of latch.

2 3/4" Long x 3/4" Wide. Latch

I need help finding a rep[lacement for this latch.

I can't find this exact replacement part anywhere. Help

Adding photos to D00661 Thanks John

Need to find this part for both right and left side.

I do not have any info on these. We have 181 apartments that mostly have a different style latch that I have purchased from Swisco.

Pat number 5.139,291. Letter F and number 75. Dimensions 2 5/8 by 11/16 with 3/8 depth. Need in white.

10c pat #5 139.291

Can you please let me know if you have the lock repacement parts. I know the windows are old. I have been in my house for 19 yrs and probably the windows were installeld 12 years earlier.

I have several broken balances, as well as the tabs for the tilt in sash. I also need three or four of the pins for the balance that attached to the window. I did not have enough room to send pictures of those

Need to get a few broken tilt latches replaced. I need a total of 12. Please review the photos that are included for further details and dimensions. The Pat # specified on the bottom of the part reads 5.139.291 Thank you in advance!

The windows are 30 years old possibly Anderson although no sure White w/ dimensions 2 5/8" long 5/8" wide 3/8 approx recess from end from dimension requested above Thank you for you help.

Ok don’t know the manufacturer but it’s a double coil with markings #5.0 35” P5232208 see picture.

Need replacement latches for 6 Norandex windows. Thanks

Need replacement part for window

You clearly show this style in your identification tutorials but I cannot find it in your inventory. I can compare dimensions of any products you suggest

Need 2 parts for window pin and release

Pat Pending 5139291. 2 5/8 x 11/16 x 3/8 has numbers 9D and 75 on underside.