Viewing all customer Discussions for:

58-014 25' Gray Skirting Pile, 1/8" x 1/2"

the bottom weather-stripping attached to the bottom track needs to be replaced.it has a bulb stripped attached to the track the door slides on. the Kolbe door is 17 years sold

Our church is in need of weatherstripping for a Jackson commercial front entry door model # 1085. After taking measurements we thought that your product 58-014, may work. Could you cross reference this product to our door to make sure this will work. Is it difficult to remove the original weatherstr ... (cont.)

Hi, Please help! I have looked and looked for the correct replacement. I hope you can help. Our EMS and Fire Station was built about 10 years ago and we have 2 areas of double doors that are metal and glass EFCO brand. There are 2 woolish strips on one of the doors. It slides out easily. Looks ... (cont.)

We need this weather stripping. We have purchase others from you before.

Hello...please see the pics. Can you help me identify what stripping I need to buy to replace this worn out pieces? Thanks

Hi I have 10 sliding screens that require new pile, attached are photo's of the existing and a dimensional drawing that I made. I would like to know the cost and availability of 100'

Hi! I wanted to know, are we supposed to pull out or leave in the bottom string on the 58-014? Pulling it out makes it more "fuzzy" and less stiff, but I didn't know that it could be done until one of our workers (who knows sewing and works with fringe that you can pull the bottom string out) ment ... (cont.)

Below are pictures of the weather stripping that need to be replaced in our doors. We need 28 Ft. We tried 58-050 but it was too small.

My patio glass door rollers broke. We think that it is part number 81-257 because it looks like it. We have taken the door off and we have pictures of the two roller assemblies. Here are the two rollers and two different orientations. One of the wheels is pulled out for illustration purposes. ... (cont.)

Do you have a white mohair weather strip compatible with the retainer attached? I would really appreciate your support.

I have some commercial door wool pile that has a base tab approx 1/8" with a pile height of approximately 1/2" . I looks very similar to 58-014 or 58-013. My wool pile is not sewn together on its outer edges do you think I can substitute 58-014 or 58-013?

I'm needing to replace the felt or pile vertical seal in the doors listed above. It has two seals that run vertical 83.25" long. Each track measures approx. .125" inside diameter. The plastic backing of the seal measures .105" wide. The felt measures approx. .50" tall. This could be taller to clo ... (cont.)

WE NEED 3/4" TO STOP THE AIR WHISTLELING THROUGH THE DOORS. WHAT WAS RECENTLY SENT TO US WAS NOT LONG ENOUGH BRUSHES. THE 58 015 WOULD WORK WITH LONGER BRUSHES IN THE LENGTH OF 3/4". PLEASE LET ME KNOW IF I CAN GET THIS. THANKS MARK

hard binder on back measures 1/8" wide and 3/16" deep. brush length and space between doors measures .350" with calipers. application is dual framed entry doors for dental complex. need 60 feet. unable to locate any manufactures info on either pair of doors. thanks for any help you can prov ... (cont.)

I was wondering if you might have a replacement for the weather stripping on this door. the only product i see on you site appears to differ a little.Any help you might offer wold be great as the company that installed the doors have gone out of businesses and i can get no info on them. these are d ... (cont.)

Hello, I am replacing the mesh and weather stripping of aluminum patio door screens. They are quite old- I assume 1958, so I have hard time locating parts for them. Do you have Wool Pile 1/4" pile height and the backing is square in section- 1/8" by 1/8". On the top of each screen there ar ... (cont.)