Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

Does anyone know where I can find this type of weather stripping or what I can use as a replacement?

Looking for an 8' section of bulb seal for a Pella slider.

Please see attached phots and let me know which weather-stripping I need.Thank you,Sharon

Dear Swisco Representative, 34" long x 5/8" wide for white seal first three pictures. If need more details let me know. Thank You Yes I want to replace all the glazing to windows as all images sent. I have 23 windows to re glaze.

I'm wondering if you can find these window sash pivots the windows were manufactured in 2006 and Matthews brothers does not have any of these parts anymore.

I also want to replace the insulation on my windows while I have them apart. The house is 20 years old with double hung wood windows with vinyl compression jams and coil spring balances.There are 20 windows and I need about 175 feet of the insulation. the insulation in it now has a 1/4 inch kerf bul ... (cont.)

Hello! I need help to find weatherstripping for this window. See the attached pictures. Thanks, Stefan

Windows installed in late 2003 by sub contractor who is no longer in business. Windows leak at bottom all year long. Air and dirt both blow in! Existing weather stripping is hollow. We are advised to replace with foam filled bubble insulation. Do you have access to something that would fit? I wou ... (cont.)

The casement windows were installed around 1990 and I don't believe the weatherstripping has ever been replaced. The stripping is somewhat dry rotted but the sash stripping is the "L" shaped insert and the jamb stripping is a bubble insert. The insert [part on both appear to be 1/4". The only ident ... (cont.)

Need white, kerf type hollow Bubble seal: the kerf and the bubble each measure 1/4 inch. Included ruler just in case. Thank you for your help. I might have to order a sample to make sure it fits.

I have the Weather Shield Pro Shield about 25 years old. I want to replace the seals and weather stripping. The # on the window is 980819000569005. My name is Keith.

I have several Pella Architect series clad wooden doors: Some are double doors some are single doors, and some are double with only one side opening. I think that the most difficult one is the double door set in the photo I sent. I included photos of the three gaskets I need most now. Please call m ... (cont.)

Please help me getting the correct replacement

Hello Which one of your weather stripping would I use to replace Pella proline and Pella architectural series casement windows. The windows were installed in 2001 if that helps. Thank you This is the profile of all the weather striping on all of our Pella windows. Please let me know your thought ... (cont.)

HiI live in NM and the seal on some of my windows needs replacing ( slightly over 100 feet). Attached please find pictures of existing seal. Hoping you can help.Barry

please help with suggestions.......lots of windows to replace weatherstripping if you can help........about 0.5" wide......tks

Hi, I'm looking for 3 items for some older Kolbe casement windows (estimated installation is the 80's) that are structurally sound but need TLC. (1) See photo 1, looking for the weather stripping that fits in the kerf. Looks like it was bubble type (similar to 58-053?), but hard to tell because it ... (cont.)

Have a casement window that has deteriorated original weatherstripping and we need help figuring out what best replacement.

house built 2001 Crestline double hundred gas filled tinted windows need new seals top bottom and middle. Are they the same seal all three places and do you have. Thank You. Graham

I talked with Cascade and they can't help with replacement parts. The sticker you see is from a slider window purchased with this and other windows. A contractor bought and installed these around October 2006. There may be information on the sticker that means something to you. I don't have an i ... (cont.)