Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

i have weathervane casement windows and looking for the bubble kerf seal

I need to replace the seals on 6 casement windows. Our condo was built in the mid 80's and as you could imagine are starting to fail. Please let me know if you need additional information Thanks, Dave

looking for the "card slot" Harvey window side insulation. Window is app. 20 years old

Hi, I'd describe this as a kerf type bubble seal. Not seeing one on your site with the extra "wiper piece" that is opposite the kerf. The bubble part is 1/4, the kerf looks to be 1/4". The wiper piece has 3 distinct ridges of varying heights. Pardon the spider! Thanks for the help, Dan ... (cont.)

One picture is the Sales Order Number on one of our windows. The 2nd picture is of a piece of removed leak seal gasket. This type of seal goes on top, side and bottom of these roll out casement windows. The seals have deteriorated and allowed hard rain to leak in. Need to identify the replacement ... (cont.)

I'm trying to restore the weather performance of 20 "Stormshield" double hung thermo-pane windows made in 1988, and installed in 1989 in my home in Vermont. I will be traveling thru New Jersey next week from north to south and back, and could possibly stop at your location to see/buy the gaskets I n ... (cont.)

There are no markings on the weatherstripping or window frame. The dimensions are 3/8" across (front to back) and 7/16" from inserted (barbed) to top. The color is gray. Can you please advise me what replacement weatherstripping to buy? Thanks,Vic

I have Weathershield aluminum clad wood casement windows the were manufactured in 2004. I am looking for replacement bulb weatherstrip that is for the operator cover which is wood and the bottom of the window frame. Do you have either the OEM weatherstrip or a substitute.

Hello, I am trying to find weather stripping for the casement windows shown below. There are two windows and there is no markings on the window so I do not know the manufacturer. The windows are likely about 25 years old. Thank you in advance for any help to can provide in identifying the weather s ... (cont.)

Need to replace weatherstripping for 22windows (18"x48") pictures enclosed.

I uploaded some pictures to your part identifier (before I watched your video on how to do so effectively). Since watching the video, I have cut my weather stripping so that I could get some useful photos for part identification. I believe I need the following product: https://www.swisco.com/Kerf ... (cont.)

Hello! I'm looking for replacement of the weather stripping on the casement windows that are the sides of the picture window

There are two different seals used on my casement windows. The second 2 photos show what I assume is some type of leaf seal. The dimensions are 9/16" by 1/4" and is made out of a plastic material. The other seal in the first photo is overall height of 1/2", bottom and center cross section are each 1 ... (cont.)

No manufacturer name or reference number available. Looks similar to 58-053 but has no "wings" and only seats in approximately a 1/8 inch groove in the aluminum frame

Hi I have Milgard casement windows that need new weather stripping. This is series 3310, product line 032-150. I'm not sure which of your seals I need for all my windows?

Trying to match this profile thanks . Lyndy

Hello I am having a problem locating a similar weather stripping for old wood casement windows that are letting water in. I will post a few pictures. Please let me know what you come up with.

Hello, I have Jeld-Wen clad casement windows that need replacement weather stripping. The windows were made in 2010. Attached a couple of images of the window seals. Thanks,

Sash lock has numbers engraved 45098. Looks like is silver. I am having hard time to tell diameter of bulb tubing and hard to match the two small extensions that come out. Appreciate you help. Thanks.

I'm trying to replace these old rubber window seals; water seems to be getting in under these seals. They are stiff, dirty and crushed. I don't see any branding on this window, just the round, track-like insert of the seal (picture provided).