Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

No manufacturer name or reference number available. Looks similar to 58-053 but has no "wings" and only seats in approximately a 1/8 inch groove in the aluminum frame

Hi I have Milgard casement windows that need new weather stripping. This is series 3310, product line 032-150. I'm not sure which of your seals I need for all my windows?

Trying to match this profile thanks . Lyndy

Hello I am having a problem locating a similar weather stripping for old wood casement windows that are letting water in. I will post a few pictures. Please let me know what you come up with.

Hello, I have Jeld-Wen clad casement windows that need replacement weather stripping. The windows were made in 2010. Attached a couple of images of the window seals. Thanks,

Sash lock has numbers engraved 45098. Looks like is silver. I am having hard time to tell diameter of bulb tubing and hard to match the two small extensions that come out. Appreciate you help. Thanks.

I'm trying to replace these old rubber window seals; water seems to be getting in under these seals. They are stiff, dirty and crushed. I don't see any branding on this window, just the round, track-like insert of the seal (picture provided).

I need to purchase approximately 120ft. of replacement weather stripping.

Hello, I'm looking to replace my weather stripping. White, piling is 9/32" high, with fin. Flat plastic is 3/16" wide. Mine has a kerf, 3/16" deep. Do you have anything close? Thanks! --Bill

end profile 3/8" width 1/4"

Slider is 5/16" Foam enclosed in rubber with slider is 10/16"

I have pile WS around the doors of my boat. I need to replace them. Kerf is 3/8" deep and maybe 1/4" wide at the bottom of the pile. I would guess the pile was 3/9" to 1/4" in depth above the kerf. Any chance you have this or know who might?Thanks, Ian

I need some replacement weather stripping for an old Hurd window. Do you have this weather stripping available?

Need a lot of replacement weatherseals for jeld-wen windows that were installed (I think) around 2006. Thank you

I'm trying to find a replacement for weatherstripping found on bottom of top sash which you can see has deteriorated on one of the windows. I bought these about 12 years ago at Lowe's. These are their windows that were manufactured in North Carolina. The weatherstripping is attached to the outsid ... (cont.)

I'm looking for replacement weatherstripping for >10 year old Jeld-Wen windows. Bubble is 3/16", and kerf base is 1/4" Thank you!

Hello, I'm trying to replace some of the weatherstripping on a children door. There's some pictures below. I can't find something that has the exact profile on your website. It's 5/16 wide. Which weatherstrip would you recommend as the closest?

Looking for replacement seals for my Caradco double hung windows. It's hard to find anything close to that bottom rail seal. Please help! Thanks David

I have a republic bow window brand republic from around 2000-2005.They crank out on both ends and i need the entire weatherstrip that surrounds each window to replace.it is rubberized gray and can be seen from the outside when cranked closed and open i can see a gap when closed from outside of windo ... (cont.)

Hello! I would like to replace parts on my Pella double hung windows, circa 2003, "insulshield" I am looking for small 1/2 foam squares in the bottom of window (see photo). Also mohair 1/2 square (see photo) And the last photo is bulb weatherstripping. Do you need more info or pics? Let me know. I ... (cont.)