Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

I have Marvin double hung windows (EZ Tilt) which were installed about 1990. As you can see from the attached photo, the weatherstripping on the bottom of the inner sash is totally shot. I believe there was originally a soft round vinyl bulb that flattened against the jamb when the window was closed ... (cont.)

This is from a Jeld Wen aluminum clad wood casement window serial #G0906451432500 CG-9 3-06 Lo-E. 5/16" bulb diameter and 1/4" base height. Would like to replace it with white. Thanks, Bob

Trying to find replacement for this push-in seal that is 3/8" wide and 5/16" tall. It pushes into a slot ringing the periphery of the moving part of the casement window and seals to the wall frame when cranked closed. It might have been a tube seal that crushed flat uniformly and broke years ago. I ... (cont.)

My name is Dimitri, See my pictures of weather stripping in my home. Looks like you carry two out the three but can but can’t find the third one. Looks white one the picture and it goes in the middle where the two windows meet.

Weatherstripping

26.25 LONG BY .625 WIDE WITH TWO RIBS. FITS UNDER AWNING WINDOW.

No need for a picture. It's a kerf seal. The kerf in the sash measures 3/32" wide and a bit more that 5/16" deep. The kerf insert of the seal is roughly 3/32" wide uncompressed and 3/16" deep. The seal bubble when flattened measures 5/16" so that calculates to 0.20" diameter - the closest fractiona ... (cont.)

Can you please direct me to the bulb seal that I need? it measures 3/8" bulb. The extension is app 7/16" overall is app 13/16 to 3/4. I hope this is enough for you to identify. Thanks in advance

Can you please tell me if you have this weatherstripping.

I need replacement seals for my casement windows. They are 1993 built Lindal wood casement windows. See attached photo.

Have a house built in 1997 with Alenco aluminum double hung windows. Trying to locate a parts list or detail of these windows so I can order sill gasket material. Also have 2 of these windows that the spiral "springs" have pushed out thru the bottom. Are there drawings or parts list available for ... (cont.)

Can you help me identify? This is on the top of all my windows. It's semi rigged and deforms pretty easily. It buys up to some foam weatherstripping on the window frame.

Hello, I neeed to replace these weatherstripping in all my windows. The foam filled bulb is installed on the top and bottom of my wood double pane windows. The bulb without foam filled is installed on the middle and the wool pile is like 2" attached on both side to the window frame ... (cont.)

Hi, Have a wooden octagon window (24") and am looking for replacement (push in) weather stripping. I can send a pic if you need one. Thanks, MF

Windows installed in 1980.

Please see the pic below showing the rotted weather strip on my 1989 ROW casement window. Do you a replacement weather strip that would work?

I have Semco casement windows installed 1999. The weather stripping around each of the windows has deteriorated the majority are 60 x 24 and largest 60 x 34. I cannot find this type of weather stripping. The arrow looking part fits into a channel on the sides and top/bottom of each window. I b ... (cont.)

Recently purchased this house and the windows appear to be Weather Shield Proshield Series casement windows. As noted in the attached photos, the weather stripping across the bottom of most of the windows is rotted out and looking for replacement weatherstripping to get me by until I can replace th ... (cont.)

Hi I have two types of weather seals that I am looking to replace and looking for 84ft of each kind. I have two kinds and one is bubble but the other one I can't tell and can't find and need help finding it so if you could assist me in finding these kinds of seals that would be perfect. ... (cont.)

Looking for replacement weather stripping for Jeld-wen casement windows produced in 1998. Approximately 36" long. Are top and bottom seals normally the same? Have 2 windows so would need 4 strips