Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

The weather seal is held in a saw kerf in the edge of the window for the wool style and in the top or bottom for the tube style. We bought these wood, double hung, 8 over 8, single pane windows from Horner Millworks in Somerset MA in 2001.

I need 231

Hi Swisco, I have purchased window springs from you in the past. I am hoping you can help me find these window gaskets/seals. It is a round tube which I believe is 1/4" in diameter and the double ribbed is another 1/4". The ribbed part that fits into the window is 3/16" with a 1/16" attachment ... (cont.)

Trying to ID this part for my patio door. The only marking is on the door handle and says "K/K" on it and I believe it is a Kolbe door. The door is a inward swing type and the part is a piece of plastic that screws to the underside of the door and holds the weather stripping. It's (34.5 in x 1.5 in) ... (cont.)

Goes all around a casement window. needs to have the groove side. Grooved section is 1/4 wide x 1/4 " tube

I bought 2 rolls of the 5/16 kerf mount weqtherstripping to repair 17 year old Caradco windows in my house. It is an exact match to the original but I am unclear how to get it seated properly in the slot on the bottom of the bottom window without being able to remove the window. The window has a l ... (cont.)

I have 12 Alenco Windows circa 1996. All are in need of new weather stripping. They are 36"w X 72"h. The bubble weather strip is 3/8"dia. (see Photos)

Could not find our kerf mounted, foam core bubble seal on your site and hope you have it, or something similar enough to work. Three pictures included. Please let me know if you need more information. Thank you for your help. Catherine W

I am Looking to replace the original weatherstripping. This window made by Certainteed and we had it since 2001. Attached is the picture of the strip. Thank you for your help. Michael.

Hi, I'm wondering if you can identify this weatherstripping. I have wood casement windows and this fits in the groove around them. House built in 1978.

These is a piece of weatherstripping from the casement windows in our house. It is very thin and narrow, perhaps a 1/2 thick max. It has a kerf and I'd like to find something that is close to it.

Hello, I think I need to order the Kerf Mount Bubble Seal in 3/8". Will you please confirm what I need to order. Pic is attached. Let me know if you need more photos. Thanks Geri

Hello, We are retrofitting a number of old double hung windows, wanting to remove the pig iron weights, rope, and insulate the window pockets and install a new type balance. Which type to you recommend? The overall window size is 32" x 57", so each sash is just over half that for height. ... (cont.)

1/8

I have Marvin double hung windows (EZ Tilt) which were installed about 1990. As you can see from the attached photo, the weatherstripping on the bottom of the inner sash is totally shot. I believe there was originally a soft round vinyl bulb that flattened against the jamb when the window was closed ... (cont.)

This is from a Jeld Wen aluminum clad wood casement window serial #G0906451432500 CG-9 3-06 Lo-E. 5/16" bulb diameter and 1/4" base height. Would like to replace it with white. Thanks, Bob

Trying to find replacement for this push-in seal that is 3/8" wide and 5/16" tall. It pushes into a slot ringing the periphery of the moving part of the casement window and seals to the wall frame when cranked closed. It might have been a tube seal that crushed flat uniformly and broke years ago. I ... (cont.)

My name is Dimitri, See my pictures of weather stripping in my home. Looks like you carry two out the three but can but can’t find the third one. Looks white one the picture and it goes in the middle where the two windows meet.

Weatherstripping

26.25 LONG BY .625 WIDE WITH TWO RIBS. FITS UNDER AWNING WINDOW.