Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

I need to replace the weather stripping (46? long) for a Pozzi window that was installed in 2004. Lab puppy pulled it off... The overall width of the strip is 1.5 centimeters (0.59 inches)and the width crossways is 0.8 cm ().31 inches) as shown in the photos. Any help would be greatly appreciated. ... (cont.)

My Kolbe and Kolbe crank out windows have a 1/4 in. bubble. the one you list is 5/16", will this work or cause a problem? Also is the spline of the seal ridged? Thanks Jeff

I want to replace the weatherstripping for my M & W windows that are about 18 years old. I can?t find this particular weatherstripping piece anywhere. I did check your website and didn?t see anything that matches. Can you recommend a piece that can be used to replace this. Thank You ... (cont.)

I think these are Anderson windows from the mid 1980's. I can't find markings on the corner of the glass. The seals are literally falling apart. The one piece intact that is shown in my fingers is approx.9/32"-5/16". I have 9 windows to do once we determine the correct product. I'm thinking the prod ... (cont.)

I am attempting to replace weatherstripping on my K&K horizontal casement windows. According to your video, it is bubble type with 1/4" diameter and either 3/16" or 1/4" flat part, picture attached. How do I order this? Just a length and cut to measure? I have a few doors as well but can't seem ... (cont.)

Good evening, i have a 20 year old home with patriot windows. The rubber weather stripping at the bottom of the lower window has deteriorated. I would like to get this replaced. It appears as if it is a Kerf type and about 1/4 inch wide. I am including a few photos. Can you please tell me if Product ... (cont.)

Dear Swisco Customer Service Representative,I am seeking replacement weatherstripping for wood casement windows that were new when installed in 1988. The operators were made by Kolbe & Kolbe and I have purchased perfect replacements for those from you previously (EntryGard Dual Arm Operator Prod ... (cont.)

I have pella pro line windows from 2004 and want to replace alll the seals

I need a replacement for Hurd Double Hung upper window lower sash seal. This seal is kerf mounted ... but instead of single circle bulb, it looks like a figure 8. I think it may just be a crushed circle bulb. It is in upper window but slides against lower window.

The attached photos include the PGT series part number and a photo with dimensions for the installed weather stripping. The windows were installed 11yr ago and the weather stripping in the photo is the original weather stripping installed in the windows. Thank you, Diane

To whom it may concern. I am repairing a few double hung windows and need to replace the center kerf seal that is between the two sashes. Attached is a picture of the profile that I am having problems finding. Due to the resistance between the two sashes when opening I wont be able to use the ... (cont.)

Hi, Good luck! Are you able to match these two Kerf Type bubble seals? Or maybe similar? And are these pics adequate or need additional ones? The measurements are my best guess with a caliper. Both of these have what feels like silicone fins on the Kerf projection. The Small seal is 0.20 (5mm) ... (cont.)

Attached is a photo of two types of weatherstripping on my Pozzi casements windows. The kerfed white foam filled bulb type is where the casements shut together. The black kerfed bulb type with diagonal flaps is on top of both casements sash and between the sash and the window frame jamb. any sugg ... (cont.)

This rubberseal in on frame on side bottom and top.

Need availability and per line all foot price.. Bubble is approx 5/16? diameter. Stem approx 3/16?

Window seal

Trying to help a customer on replacing lower black bubble seal weather strip on aluminum windows. Diameter for bubble is 5/16" approximate. Let me know. Thanks

Hi! I'm looking to replace 2 different pieces of weatherstrip on my wooden hung windows. This first piece is beige in colour and runs vertically along the bottom part of the window, outside sash in a small groove or channel to the top of that part. I found an old pic showing the window from insid ... (cont.)

Hi - I'm trying to find this weather stripping for a 25-year old wood window. It's 1/4 inch wide. Do you have this product? Please let me know if you have questions.

Hi- Can you tell which seals (bubble) I need by the original model number? I have MW DUAL built in 1992 wood windows with bubble seals. Thanks in advance, Tank