Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

Hello, Would it be advisable to install this on a DH DP wood window, if so any idea of what router bit would be appropriate? Thanks P.S. You guys rock! I hate the idea of wasting money and sending serviceable windows to the landfill. What a waste.

No window name, all stickers were painted over.

Need replacement seal material. Oval bead is 3/16"w x 5/16"h Attachment flange is 5/16w Overall width with attachment flange is 1/2" Would like to purchase 50'

I have a 25 years farley windows. I do need bubble weather strip. Do you sell those weather strip? If not, can you tell me where I can by? I live near Ottawa

I need to replace the bubble seal around the perimeter of Pella sliding glass door. I added a photo which looks similar to your bubble seal. The difference might be the tubing diameter. My part has an inside diameter of approx. .338" and outside diameter of.380". Do you think your product will fit? ... (cont.)

Needs Upper & lower weatherstripping replacement info for windows

I've ordered 58-055 for the top and bottom of my window, but noticed this ribbed weather stripping in the middle where the two windows meet. what type is this, I placed an order today, but may need to add this weather stripping to it. Home was built in 1998

I have casement windows all over my house with this weatherstripping. Do you carry something like this? Can you tell me what brand of windows I might have? I am in Indiana. Thanks

This is for front door of condo. Weatherstrip needed to reduce sound, smell and modest temperature difference between unit and common area. Existing stripping has over 1/2" coverage yet is thin so compresses down to 1/16" so perfect for the door that has large gap divergence from one end to the ot ... (cont.)

Lookin for replace weather stripping for a Kolby and Kobly sliding glass door I thnk the number are CT6 1 6OFR 12-01 ID S600 1804 this might not be exactly right but close.

I opened this window and found the weather stripping in two pieces. One of the photos shows what I think it should look like if it was still together. The Patriot window information is in one of the photos. Round part is .25 inches. I need to replace one long side of each of the windows, the othe ... (cont.)

Weather stripping both straight and angled for bottoms sash

Jeld-Wen casement windows, circa 2005. Inner seal in frame is beige, outer seal (on window) is black. Attachment contains 7 photos, with measurements. The following numbers/letters are in the corner of each window: 166375-xx, where xx varies across windows; CIG-9-3-04 LO EThanks,Joe ... (cont.)

I?m looking to replace this flattened bubble seal. I?m not sure of the exasure of the dimensions

I need to replace the weather stripping (46? long) for a Pozzi window that was installed in 2004. Lab puppy pulled it off... The overall width of the strip is 1.5 centimeters (0.59 inches)and the width crossways is 0.8 cm ().31 inches) as shown in the photos. Any help would be greatly appreciated. ... (cont.)

My Kolbe and Kolbe crank out windows have a 1/4 in. bubble. the one you list is 5/16", will this work or cause a problem? Also is the spline of the seal ridged? Thanks Jeff

I want to replace the weatherstripping for my M & W windows that are about 18 years old. I can?t find this particular weatherstripping piece anywhere. I did check your website and didn?t see anything that matches. Can you recommend a piece that can be used to replace this. Thank You ... (cont.)

I think these are Anderson windows from the mid 1980's. I can't find markings on the corner of the glass. The seals are literally falling apart. The one piece intact that is shown in my fingers is approx.9/32"-5/16". I have 9 windows to do once we determine the correct product. I'm thinking the prod ... (cont.)

I am attempting to replace weatherstripping on my K&K horizontal casement windows. According to your video, it is bubble type with 1/4" diameter and either 3/16" or 1/4" flat part, picture attached. How do I order this? Just a length and cut to measure? I have a few doors as well but can't seem ... (cont.)

Good evening, i have a 20 year old home with patriot windows. The rubber weather stripping at the bottom of the lower window has deteriorated. I would like to get this replaced. It appears as if it is a Kerf type and about 1/4 inch wide. I am including a few photos. Can you please tell me if Product ... (cont.)