Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

I need a gasket for Narco / Cardco windows. Attached is the image of the gasket. I need to only replace these gaskets at a couple of windows. I'm looking for a replacement kit or a similar gasket to have this work done. Please help me locate the gasket I'm looking for.

Request order advice.

Hey folks, I'm looking for about an 8 ft. long piece of bubble weather stripping that slides vertically into a slot on the right main door of a patio double door. The door brand name is Masonite out of TN. From top curve to tip of arrow is one half inch. Just about 3/8 inch wide. ... (cont.)

We have 12 casement windows which are 11 years old made by Certainteed. The company is no longer in business. They measure 22.5 inches by 58 inches along the outer edge. We are fairly handy, but we are not seeing an obvious way to replace the weather stripping. So, our questions are: 1) ... (cont.)

Do you offer something similar?

Wondered if you knew anything about these two seals The leaf seal is 1/2" high the bubble seal is 1/2" high I believe

I don't see anything like this in your inventory. Perhaps you have some idea where I could find the item, if you don't have it.

Hello, I am looking for about 20' of this weather stripping but looking for it in a darker color. I do not see any name or numbers on it. It is for an older wooden door that was probably made in the late1960's or early 1970's andI do not know who the manufacturer is. Please let me know if you have ... (cont.)

Hi, I have some Anderson double hung windows in my house and I need some replacement seals for them

Hello. I am looking for weather stripping for an old sliding wood patio door. I do not know the make. It's an 8 foot jam weather strip.I need something to replace on three doors.Thank youDrew

I am looking for this moldering to replace on my 25+ year old casement windows, which I believe are Marvin.

I am trying to find a replacement seal for a patio door. There is no name on the door. This slides into a small groove, any help would be appreciated.

Gasket material has degraded to the point that it is crumbling. The window is around 40 years old. Can the gasket be replaced?

This came out of a sliding door on my boat. It looks like it was pressed into a 3/16" slot. Pile height is 1/2". I'm looking for something the same or comparable.

It is the package door seal

Could you heol with those parts . One is a buble . the other one I dont know

I have Patriot roll out windows that are in need of new stripping. It appears to be a 5/16 bubble with a slot efge that slides in groove of window frame. I have included pics of the item, albeit very disintegrated, as well as the window and frame. The windows were originally installed new in Febru ... (cont.)

This is to ask for help in identifying a slotted window sash weather seal. The window sash was manufactured by Norwood Windows, a Canadian firm, in 2010. The slotted piece appears to be 1/4 inch. The round bulb appears to have a diameter of 1/4 inch.

Hello, I have older wood windows trying to find replacement Weather seal that appears to be hollow bulb gray color kerf mounted into the bottom of the window sash, bulbs have smashed and some of them coming out of The kerf, could you recommend a similar type curve appears to be about 1/4" to 5/16 in ... (cont.)

Weather stripping for Kolbe casement windows