Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

No markings or name on door. Strip is approximately 1/4X1/4XX1/4. Any ideas????

I need the two types of weatherstripping shown in the photos

The perimeter door seal has torn and need replacing. Pinacle series out swing door; 3point locking aluminum clad wood interior

I need a casement window leaf seal for jeld clad windows. The tag on the window reads NORCO WINDOWS Tetons clad casement JEL N-564. It needs to be beige in color.

I am trying to find this weatherstripping or something that will work.It has a 1/16" Groove that it presses in to the wooden frame. It may not have to be this exact version. Any information you have would be appreciated. The window is 20" x 36" and may be 50 years or more old.

Need replacement for this door bottom weatherstirpping - Atrium 36" inswing Door metal clad ouside over wood inside. Dated around 2010 purchased from Home Depot.

I have Weathershield doublehung windows that are about 30 years old. The windows are still in great condition, but the weatherstrip, particularly on the bottom of the lower sash, needs replacing. It has a very thin kerf piece, do you carry something that will work?

MFR - Code: Summit Window (JW-9) Series 8630 Need weather striping that surrounds the lower casement awning window.

Hinge says "truth". Foam filled bulb is 3/8" about.

I'm trying to locate the proper part for Milgard window. Total "height" is 13/32". Width of bubble is 13/64".

The stem that slides into the wooden window is 1/4 in and the bulb is almost 1/8in.

It 1/8 inches for the insert and 1/8 for the other

Above are some pictures of the weather stripping of an old Pella sliding glass door. On the door is the following: CGT Tempered 16 CFR 1201 II SGCC 1803(OR 1805) 5/32U

Need help finding replacement

Truth casement crank. I don't know the window brand. It is vinyl over aluminum window

Hello, looking for some angled base, bubble seal, and leaf weatherstripping. Thanks for your help Mike

Need 1500" of replacement weather seal and want to ensure I'm buying the right stuff. Per the pictures I believe the existing bubble is 5/16" in diameter. The attached kerf portion is 1/4 "

Hi I'm hoping you can help. I have a customer with Loewen (Canadian made) windows all impact rated (beach home) The are channel balance type with 1/2" w x 3/8" deep (hard to measure) 20 - 25" long (see stamp) balances (stamp is 26) 36 - balances 24" (24" stamp) 12 balances 27" (stamp is 28) The piv ... (cont.)

Hello, I need to replace a right and a left Truth Entry Guard operator. I'd also like to replace the cranks and covers with folding cranks and covers if that is possible.

I have a lower window an S751 ribbed channel balance that has a mark 36RB on it. It is 38 3/4 inches long and the window is 25.4 lbs. The upper window is 41 1/2 glass is 37 1/2 and the lower window is 29" glass is 25". I am trying to figure out the correct part to order. Since it is stamped 36 it sh ... (cont.)