Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

I have casement windows that the hardware says "Entry Gard Truth". The weatherstripping has an offset kerf with a 1/4" diameter foam bulb (see photos attached). The kerf slot in the window measures 1/8" wide. I am not seeing a good replacement on your site. Perhaps the 58-170B would work but I s ... (cont.)

Hello: I am looking for replacement weatherstripping for my Semco sliding glass door.

bulb style 1/4" bulb weatherstrip for Wellington Casement window frame

Hi Folks, Hope you can assist me in finding replacement weather stripping for a Caradco PN 4101341 french door (latch side) Thanks, Mike

Hello, this is weather stripping for a casement window on a home built in 1993. The hardware says TRUTH with an outline of a house. Thank you so much for your help!

The top sealing strip for a Jeld-wen casement window. It is about 5/8" wide and has a 1/4" kerf

Need new seal for leading edge of Pella sliding door. Probable mfr date is 2003-2004. See photos for profile, location on door and Mfr marking on one window pane with numbers.

It goes on the window frame

kerf height is 1/4 in. Total height is 5/8-in. some of my windows do not close all the way so I need something similar to this but taller. possibly a 7/8 in. or whatever you recommend.

Which Swisco product might I use to replace my broken stripping?

Hello, I am looking to replace my weather strip on my casement windows. Picture attached. Thank-you.

I have 29 Eagle Double Hung Oak windows that I need to replace the weather-stripping for. Is this something you can help me with? Thanks, Jerry

I am trying to replace the weatherstrip that is at the bottom of the sash on casement windows. It looks like aluminum. It appears that the same material was used on the casing to seal the top and sides but that is in good condition and I am not planning on replacing those sections. ( Unless we can i ... (cont.)

Please see pictures. One hollow bubble type, and one foam filled.

I am looking for this weatherstrip. Our customer stated this might be for a Weather Shield patio door, but I am unable to find this anywhere. The top "flap" is soft and pliable. The styles I have been finding are all rigid on that top part. Please Help! Thanks!

on a Jeldwen TCA3640 Clad Teton Awning Unit 36" SeriesThe original weatherstip has hardened and does not seal

I believe this is the 5/16" bubble seal with the diagonal kerf of about 1/4". Can you confirm?

Hi, I'm looking for a weather seal that is inserted into the window wood frame on my Pella Casement Window's; House blue print indicates window's are C15 & C25 number; unable to location any serial number on window glass frame area's as indicated by Pella Co. The window have the pella sim-shade ... (cont.)

Weather 1.jpg-guy brought this in and its labled top and bottom Weather 2.jpg-labled Window Sides Weather 3.jpg-Doors tops and sides

Hi, I have three sliding patio doors that I am refinishing and need to replace the weatherstripping and threshold/door bottoms. The brand and model is unknown. There are no markings on the frame or between the panes. They were installed around 2004. Best guess is that the brand is either Far No ... (cont.)