Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

Just bought the house. Water damage, appear to have been leaking for a while, even in the desert. Thanks

I have 2 different types of gaskets/seals that are dryroting.> One for the bottom of the bottom window> One for the inside bottom of the top portion of the double hung window.I have attached pictures. The windows are 20 years old with no visible indication of manufaturer.

Hi looking for this weather stripping house was built in 2012. This is a jeldwen product door 2 panes and a swing door off back yard.

due to the sun a few of these are coming off. this one pops into a groove at the bottom of the window.

Looking for replacement door bottom sweep for a 34" Hurd Metal Clad Door. I included pictures of what needs to be replaced. Do you have any suggestions?

Wellington Window Replacement Crank-out window weather stripping for hinge side of window (black)

Not sure how to describe other than it's foam filled bulb with a little flap on it and is push in type.

Hello! We are looking for some replacement weatherstripping for the following window: Pella casement, crank opening window. 58"H x 30"W estimated size. Purchased and Installed in 1980 - it's in great condition. If we cannot get an exact match for replacment, can you provide something equivalent? ... (cont.)

Hi, looking to iD weatherstrip bulb style for 1988 built house with original casement windows. Lots of truth hardware but I'm not sure of the brand. Here is a sample of the profile. Its very different from what I see available. Thank you.

I am seeking replacement handles for a few transom-type windows (? terminology?), that are hinged on the top and open with a side-swing of the handle as shown in the picture. The logo says "Vistarama Windows" and the house was built in the 1960's so I am guessing that they are from that era. If you ... (cont.)

These windows are 12 yrs old and most have never been opened. I need to find replacement weather seal. Stamp on casement window is:CTG Tempered16 CFR 1201 IISGCC 1804 1/8 UA The windows are approx 23"x68"

I have Norco casement windows and need to find replacement weatherstripping for the casements. The numbers on the windows are as follows: (4) Norco 1N36, (3) Norco NC2X42, (2) Norco NC4224 I also need to get bubble seal for these windows and can send pictures and drawing for that separately. ... (cont.)

I have Jeld wen windows that I am looking to replace the weather seal. the window is Jel-n 187-00 builder series clad casement

Looking for help finding these door bottoms and weather stripping.

1/4 inch base height bulb diameter 4/16 or 5/16

This seal is attached to the frame of the window. Do you have a replacement Thanks! John

Hi guys, Hoping to identify my weather stripping.

Hi, I am trying to identify this bulb weatherstripping. I am hoping that you might be able to match it. Measurements are:Bulb width is 5/16".Bulb height is 4/16". Height of base is 1/8". Width of base is 4/16 to 5/16". Thank you for any help you can offer Anthony

I am looking for replacement sill weatherstrip for a hinged inswing patio door that I believe is a Ply Gem. It is aluminum clad wood door.

Hi, I am seeking an offset hollow bulb weather strip replacement for between the upper and lower sashes on a doublehung window. Thanks.