Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

I have 4 Eagle casement widows I need new seals for. I will send pictures

I am looking to replace existing weatherstripping. Current weatherstripping is worn and causing some leakage. Please let me know what you have available. Thank you for your help!

Do you offer something similar?

I'm not sure the manufacture of window. Installed in home 2005. Possible MW windows. Photo shows a T channel.

Looking for weatherstripping and hinge sets for Norco Teton metal clad windows. Dimensions of the weatherstripping attached. The hinge is fine but the metal swivel piece plastic cover has deteriorated.

hello can you please advise on a replacement weather stripping for 2021 Scherer Bros. Far North crank out casement windows. Would it be worth it to look at stripping that includes foam?

I don't see anything like this in your inventory. Perhaps you have some idea where I could find the item, if you don't have it.

Hello, I'm looking for 1/4" thick foam filled weather stripping for a Marvin window - the mystery is that the kerf extends the opposite direction of the push in section acting as a water diverter, I have never seen this before and can't locate any replacement, would love the help. The foam section ... (cont.)

Hello. I am looking for weather stripping for an old sliding wood patio door. I do not know the make. It's an 8 foot jam weather strip.I need something to replace on three doors.Thank youDrew

The folded over piece is 1/2". The piece that fits in the slot is 1/4".

I am looking for this moldering to replace on my 25+ year old casement windows, which I believe are Marvin.

I am trying to find a replacement seal for a patio door. There is no name on the door. This slides into a small groove, any help would be appreciated.

I have attached some photos of old bubble seal taken from an older Marvin awning window that was installed when we built our house in 1988. I'm trying to find replacement bubble seal because, as you can see, the existing is old and falling apart. Any ideas on what product would work as a replaceme ... (cont.)

Hello,I am looking to replace some weather stripping on my windows and hoping you can identify. I wasn't able to see a manufacturer on the windows. Let me know if you need further photos!Thank you,Jonny

Hello, I have older wood windows trying to find replacement Weather seal that appears to be hollow bulb gray color kerf mounted into the bottom of the window sash, bulbs have smashed and some of them coming out of The kerf, could you recommend a similar type curve appears to be about 1/4" to 5/16 in ... (cont.)

I'm looking to replace weatherstrip for Jeld-wen siteline clad sash C series casement windows. Size frame 24 5/8 x 35 5/8. Photo of weather strip attached. Thank you

Looking for replacement window kerf bubble weather strip. Original was foam filled in bubble and around kerf. Dimensions look to me to be 5/16" bubble, 1/4"x3/16" kerf. The kerf is a hard plastic. Do you have a replacement that will work? Thank you so much!

Hi, I was needing a shit ton of the window weatherstrip. And enough for 2 doors.

Markings etched on window pane bottom right corner: Windsor windows, IGCC @ CBA E$, ICMAC C1G-10, 1-06

Looking for replacement weather seal. Thank you