Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

I am seeking replacement handles for a few transom-type windows (? terminology?), that are hinged on the top and open with a side-swing of the handle as shown in the picture. The logo says "Vistarama Windows" and the house was built in the 1960's so I am guessing that they are from that era. If you ... (cont.)

These windows are 12 yrs old and most have never been opened. I need to find replacement weather seal. Stamp on casement window is:CTG Tempered16 CFR 1201 IISGCC 1804 1/8 UA The windows are approx 23"x68"

I have Norco casement windows and need to find replacement weatherstripping for the casements. The numbers on the windows are as follows: (4) Norco 1N36, (3) Norco NC2X42, (2) Norco NC4224 I also need to get bubble seal for these windows and can send pictures and drawing for that separately. ... (cont.)

I have Jeld wen windows that I am looking to replace the weather seal. the window is Jel-n 187-00 builder series clad casement

Looking for help finding these door bottoms and weather stripping.

1/4 inch base height bulb diameter 4/16 or 5/16

This seal is attached to the frame of the window. Do you have a replacement Thanks! John

Hi guys, Hoping to identify my weather stripping.

Hi, I am trying to identify this bulb weatherstripping. I am hoping that you might be able to match it. Measurements are:Bulb width is 5/16".Bulb height is 4/16". Height of base is 1/8". Width of base is 4/16 to 5/16". Thank you for any help you can offer Anthony

I am looking for replacement sill weatherstrip for a hinged inswing patio door that I believe is a Ply Gem. It is aluminum clad wood door.

Hi, I am seeking an offset hollow bulb weather strip replacement for between the upper and lower sashes on a doublehung window. Thanks.

I have 4 Eagle casement widows I need new seals for. I will send pictures

I am looking to replace existing weatherstripping. Current weatherstripping is worn and causing some leakage. Please let me know what you have available. Thank you for your help!

Do you offer something similar?

I'm not sure the manufacture of window. Installed in home 2005. Possible MW windows. Photo shows a T channel.

Looking for weatherstripping and hinge sets for Norco Teton metal clad windows. Dimensions of the weatherstripping attached. The hinge is fine but the metal swivel piece plastic cover has deteriorated.

hello can you please advise on a replacement weather stripping for 2021 Scherer Bros. Far North crank out casement windows. Would it be worth it to look at stripping that includes foam?

I don't see anything like this in your inventory. Perhaps you have some idea where I could find the item, if you don't have it.

Hello, I'm looking for 1/4" thick foam filled weather stripping for a Marvin window - the mystery is that the kerf extends the opposite direction of the push in section acting as a water diverter, I have never seen this before and can't locate any replacement, would love the help. The foam section ... (cont.)

Hello. I am looking for weather stripping for an old sliding wood patio door. I do not know the make. It's an 8 foot jam weather strip.I need something to replace on three doors.Thank youDrew