Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

1980 pella windows.

These two pieces of weatherstrip came off a vinyl casement window. Pic 3 and 4 came off sash. Pic 1 and two came off frame.

where can I get this kind od window stripping

This is a weatherstrip that goes on the frame of a casement window (sides, bottom,top) to seal against the sash. It has ~ 1/4 inch ribbed insert into wood and then ~1/2 inch flat piece with a 3/16 inch piece sealing against the sash.

I am trying to figure out what type of weather stripping to order. The L shape fits into a groove in the bottom of the window. Round part is 1/4 inch diameter, top of L to bottom is 1/2 inch, little L part is 1/4 inch wide.

Please identify the replacement seal. My house was built in 2004.

these are from circa 2010 Marvin windows overall height = ~7/16" kerf depth = ~3/16" base width & bubble height = ~5/16" kerf offset from center of base

I have two double pane windows which need new weatherstripping, 4 stripe for each window, 2 x 45.5" and 2 x 19". Hope you still carry replacements. Thx.

Do you carry a weatherstripping that matches this profile?

There are 2 kind of stripping - 1. The white one is on the exterior window. 2. The gray one is installed next to the screen inside.

Hi i have some old Renewal by Andersen casement windows that need new weather stripping. There are two different ones as shown in the photos. Gray goes between the pane and the inside frame. White goes on the outer edge of the pane. Windows are probably 25 years old. I have 4 windows to do fo ... (cont.)

We have 4 casement windows that I believe are Kolbe installed in 2005. The Kerf(?) weather stripping needs replacing on the vertical side. It looks like I can't replace any of the other 3 sides. The vertical open side is in the worst shape. I can not find any product labeling other than on some o ... (cont.)

We need help identifying and purchasing the correct pinch jam seals on our glass patio door.

We have Pella casement windows that are approximately 35 years old.The weather strip has deteriorated and we need to replace it.Measurement:1/2" flat widest width and 3/8" the vertical of weather stripingIf questions call, Steve

Can't find info on window brand. This piece of weatherstripping pushes into bottom slot of casement window. These are crank windows

Weather stripping from vintage 1985 Weathershield windows. Product needs to slide into a dado groove on the window frame. I will also need stripping for the windows themselves. Hopefully you have something that will work for me.

The perimeter door seal has torn and need replacing. Pinacle series out swing door; 3point locking aluminum clad wood interior

Anything close??

Hello.Can you please recommend a replacement weatherstripping product for the double hung wood custom build windows in my home?See attached photos and let me know if you require any additional information.Thank you.Corey

This is a replacement for 2001 Napco vinyl double hung replacement windows. Do you have a match?