Viewing all customer Discussions for:

70-008 5 Pack, Screen Plunger Pin Latches, 7/32"

I am looking for the pins that screw in at the top of the screens and can't find them. I attached a picture of the pin I took off on one of the screens as an example of what I need.

Hi, I have an unknown brand skylight. No identification markings on the frame. The screen measures 23 2/8" by 19". There are two pins that hold the screen in place. The pins have corroded and I need replacements.

Hi...I need to replace some broken screen plunger assemblies. The total plunger length is 1 5/8" long. The diameter of the plunger that protrudes from the screen frame is 3/16 and approx 3/8"long. Appears that somehow a spring is contained I am unable to determine who made the window. ... (cont.)

Hello, I'm looking for the pins that are on the top of the window screen that help to hold the screen in place. They insert it into the top of the window. Thank you.

I have screen frames that are 1" X 5/16". Will the screen plunger pins 70-008 and 70-009 work on this width of screen frame?

how do I determine which size screen plunger pin is the correct replacement? 5/32 or 7/32 ?

Hello, Can you help me find replacement pins for Peachtree Window screens?

Hello, I need to replace some cracked plastic inserts in the window frame ... the things that the plunger goes into. What are they called? Do you have them on in your catalog? The arrow points to one in the photo.

Need two of these for a small window screen. I believe there was a small spring included with this part also. Thanks

Looking for how to size and select which plunger pins I need. Screens came with Weathershield windows installed in 1995--so I need to replace a lot of the pins.

hi I need replacement clips for all my double hung screens. They are all double hung aluminum frame for the screen. I got these very very long ago maybe 2002-2004? I am not sure. the must have a spring to catch the screen and attached to the window frame. These are all falling out now from the wind ... (cont.)

I am trying to find the correct size screen window plunger pin. As you can see by the photo, the black pin is the original which I am trying to match. The silver pin was bought as a replacement but is too small to fit the holes in the screen. The screen and window are a K&K 14 HD. Could you off ... (cont.)

Hi, is it possible to obtain a pin similar to the 70-219 but in aluminum with a black cap?

Some of the plungers have broken. Where can I find replacements. Thanks

Need 8 of these and 4 latches

Hello, I am looking for 100pcs of these plungers, I found some that look similar but don't know if they would work. Could you please help me find the correct plunger or one that would work? Thank you!

I need at least 30 of these---- they hold the screen in the window frame

Hi Folks,I am looking for thes plastic tabs used to lock in the window screen to the frame. Do you carry? Thanks, Pete

I have jeld wen windows and the exterior screens have small spring loaded pegs that is in the frame to hold the screen to the window. The pegs have a plastic head to grab on to. Several of the plastic heads are cracked from sun and heat exposure. Can I get replacement plastic heads? Other sugge ... (cont.)

Weathershield New Style Metal Grille Clip with tab for double hung tilt windows.Used with several brands - Weathershield and othersMaterial: Stamped SteelMeasurements:Height (from base to apex of the folded tab): 1/4 inchWidth: (projection of pointed tip): 3/8 inchCombination Vent Lock / Security Ni ... (cont.)