Viewing all customer Discussions for:

70-008 5 Pack, Screen Plunger Pin Latches, 7/32"

I have jeld wen windows and the exterior screens have small spring loaded pegs that is in the frame to hold the screen to the window. The pegs have a plastic head to grab on to. Several of the plastic heads are cracked from sun and heat exposure. Can I get replacement plastic heads? Other sugge ... (cont.)

Weathershield New Style Metal Grille Clip with tab for double hung tilt windows.Used with several brands - Weathershield and othersMaterial: Stamped SteelMeasurements:Height (from base to apex of the folded tab): 1/4 inchWidth: (projection of pointed tip): 3/8 inchCombination Vent Lock / Security Ni ... (cont.)

Looking for parts for screen. Spring loaded pins and the top spring

My pins are 1/8" diameter by 1" in total length (without the cap). What do you recommend?

My name is Mark and I am looking to replace the following missing piece of my window, model EAGLE, IGCC CBA, IGMAC CIG-3, 2-90. The last pictures are of the missing part and the first pictures are of the actually part on the other side of the window as well as the part from the screen that fits into ... (cont.)

Hi,I need to replace a window screen plunger latch on my Marvin window. It is 1.5" long with a 3/16" diameter on the end and 1/4" diameter on the handle end. Unfortunately the screen came to us from the contractor with one latch missing.I am hoping this is enough for you to identify the missing part ... (cont.)

The assy consists of a pin mounted along the outside surface of the screen ( 4ea ), a spring mounts on the pin on the inside of the screen, the latch is molded plastic. It locks into a track in the window frame, then is installed on the pin/spring combo. I pray you guys can provide me with a dozen o ... (cont.)

What is this part of my casement window screen called and where can I find it. I live in Deerwood Minnesota 56444. It is for a screen that is approximately 28 x 40. I should have 8 in my screen but only have 4 - lost 1 in each screen resulting in one side jutting out from window and not secure. Id ... (cont.)

I have WeatherShield Legacy double-hung windows that I purchased about 20 years ago. The removable screens, which are one piece and cover the entire window, are held in place with several plastic clips. Do you carry replacement clips? Jim

I'm looking Crestline plunger pin latch for screens purchased in 1999. I'm not sure if they are 5/32" or 7/32". How would I measure to find out? I'm adding a picture to show you what I currently have.Thank you.Keith

I am looking for the screen plunger pin as shown in the photo. Over time the plastic has become brittle and lost as screens replaced each spring and fall. Thank you.

For Dailey manufacturing co willow grove Pa. For screens

Window cleaners broke one of my screen retainers. Marvin Integrity 2009-10. Similar to your 70-219 but doesn't have the external ring on the plunger and the end is not tapered. The pin is white with a clear cap.

I need to order some screen plunger pins. I have attached a drawing. Measurements are as close as I could get, but maybe not perfect, as things are kind of out-of-round. There is a spring also, which I didn't include in my drawing. I will need about 200 of them to do all the screens in my house. ... (cont.)

I'm not a great measurer..... I think ( minus the spring ) - its 1 1/2" long... The plunger is 5/16" and the 'tip' is 1/4" ? Please let me know your guess & I'll order. I do know about drilling larger holes if necessary. ( and I have fixed other parts on the window ( ie: T-Lock shoe/springs ) ... (cont.)

I have Pins that fit into the exterior of the window, photo "Window". The pins are 1 inch in length and 2/16th in diameter photos "Screen Pin" "Pin Fastener" Is it possible to identify these pins? I am unable to make a match on your site. I am assuming the age to be ~30 years. Thank You, Kim ... (cont.)

The pin is 1 3/4" in length, and is made of plastic. The window was installed circa 6 years ago. On the window it says: CIG6 15 AWA 42804-4A11 NFRC 272 Integrity From Marvin.

I need some of the spring loaded push pins that hold the screens in their tracks. The one picture shows the number on the Integrity screen.

This is for a Marvin Window screen. House built 94-95. Have anything similar?

What size Plunger pin do I need to use ? Thank you.