Discussions for 70-009 : SWISCO.com

Can 70-009 replace 70-136?

I have the assembly as picture above or part #70-136. These only have 2 per pack but part # 70-009 has 5 per pack. Would part # 70-009 work as a replacement for part # 70-136. The pin length that I have is 1 & 1/4 inch but part # 70-009 is 1 & 1/2 inch length. Should that make much of a difference4? ... (cont.)

How to install your Screen Plunger Pins

I bought some screen plunger pins from you this week(see attached photo). I believe I received the incorrect black plastic snap covers. I would think that the plastic tabs would snap into place at the narrow end of the pin to keep the plunger pin from sliding out of the screen. These black plastic c ... (cont.)

Marvin Infinity screen pin

The image shows the pin that has the tip broken off, so it appears shorter. I'm unsure what to replace with because all I see online are pins with springs. This one is a place plastic piece. I'm happy to upgrade to something more substantial if it will work. Any thoughts?

+2

Unable to Remove Broken Plunger Pins

Most of our window screen plunger pins are not functioning. They seem to be frozen. The pins will not pull back or push forward. I tried spraying lubricant in the screen hole. The screens are about 15 years old but in good condition other than the plunger pins. How can you remove broken plunger pin ... (cont.)

Screen pin replacement parts

This is a spring loaded pin which helps the screen stay in place at the top left and right and lower right and left sides. Jeld Wen screens about 15 years old.

Marvin window screen pin

See photos

Window screen pin

Hello,Regarding my attached 2 pictures above, showing the windscreen pin that I am needing more of & also showing you the window side tracks. I don't see it going into any special slot, maybe the window side tracks? I just know it secures the screen in. This house was built in the 1980's. T ... (cont.)

Plunger - plastic or other

Looking to buy plungers for my screen window frames

Window screen clips

It slides into the window frame to lock the screen in place.

screen plunger bolt cover

Hi. I'm looking for replacement caps that go on the plungers that have been breaking off of most of my windows.

Screen Pin

Hi, I am trying to find a replacement screen pin for the old MW windows. The picture attached is what the pin looks like. Anything that would work in place of it would be fine. Thank you!

Window replacement pieces

Swisco,I need a few parts to replace on my windows. I need new pins to hold the screens in place. I also need the plastic curved plastic that holds the glass in place, it has dry rotted from the heat and age of the windows.

+2

Pella screen pins

I have pella double hung windows with full screens from Lowe's. One of my plunger pins broke and I need to remove it and replace with a new one. They have a black handle on the pull part. What number part would I need to order?

Replacement pins for window screens

Hi - which pins would work here?

Need these parts

I have Loewen windows that were installed 2001 or so.Screen pins.Awning window cranking mechanism.

Window screen replacement piece

These go into the screen and pull out to release the screen. I'm looking for the right size that I need to replace the ones that are lost or broken.

Screen thumbscrew

This screw goes through window screen frame to hold screen in window

Replacement parts "WindowShield" double hung

I want to replace the countertop weight shoes on my windows the old ones are just cracking and breaking and refusing to slide. I assume I can just replace the shoe not the complete counter balance?I also have the screens which need to have their pins replaced also I’m sending picture of the it ... (cont.)

+3

No existing names found

Missing screen clips. Need help in finding them

WeatherShield Outdoor Window Screen Fastener

I'm looking for WeatherShield window screen fasteners that are spring-loaded and fit in pre-drilled holes in the window screen frame to keep the screen in place on the window frame. The part is 1 1/2" long.

Viewing all customer Discussions for: 70-009 5 Pack, Screen Plunger Pin Latches, 5/32"

Viewing all customer Discussions for:
70-009 5 Pack, Screen Plunger Pin Latches, 5/32"