Viewing all customer Discussions for:

70-009 5 Pack, Screen Plunger Pin Latches, 5/32"

Do you have a match?

Window Part # HA068310SSMI DIMENTIONS: 23 3/8 X 23 3/8 POSSIBLE DUEL ARM OPPERATOR

I?ve got 70-009 plunger pins on the way to replace the pins in all of my screens. I am also replacing the screen in the frames. While removing the old screen from the frames, I noticed that the manufacturer (Marvin) installed the screen and spline in the frames first and then drilled though the fram ... (cont.)

I need one of these for a Kolbe window

Aloha Swisco, My awning window screens are all retained by metallic screen frame plunger pins. Most of them have rotted off due to the salt air and those that have not are frozen in place and inoperable. They seem to be dimensionally similar to the 70-009. It does not appear that they can be drille ... (cont.)

1-3/16" long; 1/8 " at one end; 3/16" at the other end, with what appears to be a spring wound around the narrower end. May be a fragment. I think it may be one of two pins that hold the screen to the window frame. In any case, i need four replacements.Thank you,Les

I have several missing or broken pins that hold my window screens in place. They retract to insert the screen, then engage a hole in the window frame when released.

Do you have a step down plunger drill bit 1/8" to 5/32"?

I'm looking to replace my plunger pins on my screen windows. I was hoping you could identify which ones I need. I've included two pictures. Thanks

Need around 40 screen pins

Are the 70-009 replacement pins solid aluminum or are they an alternate metal with a zinc plating?

I am lookinf for the clips that attach a screen to the trim of a window

Hello,My channel balance window screen panel screw was broken (see 2nd photo comparing with the 1st one), and the window side "clip" (not sure the exact name) which can hold the window was missing (see the 3rd photo comparing to the 4th one). Can you please help me to identify the parts names as soo ... (cont.)

I am looking for screen pins for Marvin double hung windows. The pins are about 1.6" long. The diameter of the pin opposite the plunger is 0.1625" The diameter of the spring portion of the pin is 0.12" The diameter of the narrow portion of the plunger is 0.195" The diameter of the wide portion ... (cont.)

Good afternoon, This is what it looks like. It sits on the outside of the window and the corners clips on the inside of the flange at each corner. The middle has a pen lock, that also locks behind same flange as corners. The corners are about 1in x 1in The track is also about 1in ... (cont.)

I didn't see any of the coil balances that look like this and was wondering if this is something that you can source if I could take one out

Hi, I have Superseal Series 1650 and 1850 windows ans screens from 2002. I need these little pins that hold the screens to the window panes. Not sure how to take them out to show you. Feels like a spring us behind cap.

Hello,I need replacement screen retainer clips for my Rollyson DH-c45 Series 2500 window screens. I do not wise to have mismatched clips on my windows. I would like, if possible to replaces the damaged clips on several of my windows. Please find attached several photos of the screen clips in quest ... (cont.)

Screen window part

Hi, Trying to identify the correct replacement part for Marvin Integrity Screen Pins in the year 2012. As per your posts could be 70-008 or 70-009? Or a different number altogether? Please advise. Muki