Viewing all customer Discussions for:

70-074 Insert Clip, 1/16" offset

Can you identify this clip ? It's missing the screw cap/plug

Do you carry this clip to replace broken one

The custom storm windows in my house, installed by a previous owner, are 26+ years old. Their frames are fixed, but the windows themselves can be removed and replaced with screens each summer. The small plastic latches (about 10 per window) have deteriorated and broken over time. I do not even know ... (cont.)

I would like to replace the insert clips and screws for casement window screen. Please let me know which screw is the best for the clip. #10 screw has 3/16" diameter and the clip Hole size is also 3/16". Is #10 screw OK to use or a little tight?Thanks.

Can you tell me if you have these fasteners.

Second of two emails to you. -DeFranco Glass

Can you suggest a replacement for my broken screen clips? The broken one is at the right in the photo.

I have a bf rich Bow window. Needs one screen clips

Hello I need these handles to hold the mesh windows Thank you for you help

I think these are from a mid 90's home improvement project. There are no markings on the windows or frames. Interior screens, the windows wind out.

Clip # 70-074 is 3/4" long. Do you sell any longer 1/16" offset clips? I need a clip that's at least 7/8" long, but I would prefer a 1" long clip. Thanks.

No branding on these clips or the windows. The storm windows are standard 1/8" glass with frame. The plastic slides in the clips slide into holes in the window trim.

Hello I am trying to replace my window holders I can't decide between 70-074 insert clip 1/16" offset or 70-209 dimple clip My clips are 7/8" long 1/16" offset with a dimple at Pointy end 1/8" screw hole size with a 3/8" diameter round part that Makes the offset, which Including the Offset is 3/8" T ... (cont.)

Looking to buy 12 of these tabs that hold the screen in brown

Thank you for your patience during this busy season. I recognize this clip; in fact, I just had a customer the other day looking for this exact part. What a coincidence that they should break at the same time.Our research, however, proved to be less than fruitful. We weren't able to find an exact ma ... (cont.)

Need many screen clips. NAMI on windows. Pics attached. House built in 1996. Reds, Virginia

I've got several broken screen clips (1/16" offset) that go on BFRich crank out windows. I can't figure out what kind of tool it takes to remove them so they can be replaced.

To the left and right of the window the plastic Hardware that holds the screens in. And in the front of the window the plastic clip that holds the Shelf there there's only one that's like a U shape.

The crank handle may match your part number 39-104 The weephole cover may match your part number 26-186 But the turnbutton screen clamp I could not find on your site

I need screen clips for Crestline Windows that are from about 1996 screens they are similar to 70-074 but the swivel part is wider and flat on top side or where screw goes in. Do you know if this clip will work? Thank you