Viewing all customer Discussions for:

70-080 Window Clip

these are from an aluminum single pane single hung window from around 1995. Each window has one at each corner. Without the face guides, the windows are sloppy. They are approximately 1-1/8 x 1/2 x 3/16, except its a little over 1-1/8, and a little less than 3/16, which makes me think it's metric. ... (cont.)

I'm trying to find these old screen turn clips for my sunroom Windows. Anybody able to help find these or something else I can use as a substitute?

Looking for replacements screen clamps for 1980s Silver Line Jalocy / Awjing windows. 1-11/6" long 1/2" wide.

Moved into home with older storm doors with this style of retainer clips in uploaded pictures. There's 2 different styles of clip in the pictures. The first two pictures are a white metal clip and third picture is a white plastic clip with thumb screw I believe is the original clip because it has te ... (cont.)

I'm looking for the specialized screw that goes into the mechanism as well as the plastic bushing also I need the snap in Window glazing caps I think I can find the screen retainers but if you have those ones, I could use those as well

Hi there. I need some replacement parts for the attached photos. 3 full operator assemblies, two crank arms, and several retaining clips with thumbscrews for holding screens in place. Please advise correct part numbers. Thank you! John

Do you sell these small plastic clips that keep the window screens in place for my roll out windows. Here's the type window and three sides of the plastic window clips that are needed. The clips are 1 3/4" long x 1/2" wide. I'd need a half dozen to have on hand to replace any of those that break off ... (cont.)

.

Any suggestion on what we can use to replace these window clips? Product 70-211 looks like it won't be long enough

HelloI am looking for a window clip and screw part along with a crank handle for the window - this os a "sun room " from the 70's . I semt pictured above . Thank youVivian

Clip is 1 5/8" x .5" Plastic screw is 7/8" long

Hi: I'm searching for plastic clips for a no longer produced Armaclad Storm storm door. See photos of needed clips. Thanks

I am looking for replacement screen clips: corco plastic screen clips. Pic included.

Jalousie Window OperatorMeasurements:Between top and bottom holes - 5 1/4"Between bottom holes - 1 1/8"Arm length - 2 1/2"Width - 15/16"I am in need of 6 units of each of the parts listed in the Subject l

Hi, do you carry this part? The first image is 1 3/4 inch long. If you don't carry this part, do you know where I can and what is this type of fastener called? Thank you Tina

There are no markings on this part. I have been unable to find these anywhere, including Ace Hardware, Lowe's or Home Depot. The clip is approximately 1 1/2" long, 2/3" wide, and depth of clip approximately 1/4". The screw is extremely small at approximately 1/4" long. I would certainly appreci ... (cont.)

-My contractor suplied yuor website and wants me to order the right parts, i need 88 clips and screws, thanks. Jimmy

Hi, I am looking for brown clips. You only show white? Do you have, can you get brown clips?

Hi, These clips hold a screen over my awning windows.....there are 6 in total. Can you tell me if you have these as I cannot determine from the multiple photos of clips you sell if mine is one of them. Thank you! Sandra

1. I am looking for some white crank assemblies like in the 2 pictures above. Screw holes 5 1/4" on center 2. I am looking for aluminum tabs to hold screens in place with screws like picture above. 3. I am looking for aluminum covers for hole in aluminum frame like picture above. ... (cont.)