Viewing all customer Discussions for:

70-180 Storm Door Insert Clip

Door serial number 64504102.111030521. The original retainer strip is part #120232810D in cranberry. However I can accept any other color including black, part #120232805D. Please advise if you can provide either of these parts for purchase.Thank You, Jerry

Look for the best comparable match for a storm door full view glazing bead. Thank you

The snap in pieces that hold the glass or screen in a Papaiz door have deteriorated and need replacement. The horizontal pieces are 29 inches and vertical are 73 3/8 inches.

This item is for aTrapp storm door glass the item is to secure the glass that is attached storm door!

looking for 6 of the clips in the photo thanks

Cole Sewell registration number 04089796042-141. I need the extrusion strips that hold the glass in place. Both sides and top/bottom.

HI there...Unfortunately, there is no indication of the door manufacturer. The first image is an example of the retainers in the door. It's the opposite side that is broken. image two and three are different angles of the strip I need. Please advise if yoyu have them or if you have additional q ... (cont.)

Hi, I'm trying to find replacement push-in weatherstripping for my front storm door as I don't want to buy a whole new door. The shape of the 72-inch strip looks like maybe I should order part 58-170B but there's no foam in my current weatherstripping. Is it possible the foam just melted - house is ... (cont.)

Hi, the vinyl window strips (that allow us to switch from screen to glass on our outside storm doors), are worn and I need to replace. I can't find the manufacturer but attached the strips. They go on each side of the door - they are 1/4" wide, and the strips are 68" in height. Do you have a prod ... (cont.)

Hi, I am looking for clips to use on my storm door to hold the screen or glass. They seem to be the same size and features on your 70-180part...but mine does not have the offset part...the 90 degree part. I got these clips with the purchase of Victorian storm doors from Heirloom Screen Door out ... (cont.)

Larson storm door. Dimensions 36" x 80"

Would you carry these snap in retainers.

Above picture of clip. I need a longer part that fits against the screen. This is 1/4 inch. Prefer metal and white. The off set is 1/2 inch which is fine

This vinyl glazing holds the glass in a storm door. Two 30 inch pieces were throw away when the glass was broken. I have been to several window and glass companies and a glazing supplier and no one has this particular product. On the glazing it says "With print towards you, Insert this end. Do not t ... (cont.)

plastic clip to hold glass in a storm door

I am trying to locate the retainer strip which secures either the screen or storm window into my storm door. There are 4 pieces of this strip, right, left, top and bottom. I cannot find a manufacturer tag on the door so Inhave no idea who made it. Thanks for any help. Regards, Glenn ... (cont.)

Vinyl plastic strip to hold in full size screen door

Hello - looking for these profiles retainer strips. The doors are roughly 18 years old. Larsen does not have the replacements. thanks, Paul

I am looking for a retainer replacement - the pictures show the size and shape. It snaps into the side mount and holds in a storm sidelight cover. Please let me know if you have anything similar. I have more photos if needed. Thanks

Need to replace the storm door glazing bead that holds the storm door sash/glass In place. 25 years old. No marking to ID anything. Included is molding in place & partially removed with measurements.