Viewing all customer Discussions for:

70-195 Window Screen Pin

my push pin is 1-5/16" total in length and the length of the pin is 3/4" to the notch and 1/2" from the notch to the end of the pin. everything else seems to be the same as your 70-195 pin. will yours work, and if not, do you know where i can find these?

Hi, After about 10 years, a bunch of my windows need various parts replaced. The windows use plunger bolts on the side, and pins at the top to anchor in place. I measured the diameter of our pins and they are 0.157 inches but I've only been able to find the 1/8 push pin here. Since the holes a ... (cont.)

My porch screens currently have nylon push pins similar to your 70-195,1/8 x 1 1/4". After 10 years of the sun baking them, they have become brittle and many have broken and need replacement. As the holes for these are already 1/8", could I use your 5/32 push pins? The screen frame depth is 11/16" ... (cont.)

My name is Joe, and I need a little help picking the right item from you guys. I'm hoping you can let me know which plunger pin would be the best to use on our old screens. I'm going to attach a picture of the holes and window frame. The frame is around 3/4" wide where the pin would go through as y ... (cont.)

Hello. I have 31 windows in my home. They are in fairly good condition, but the plastic pull tabs on the corner pieces are all breaking (see picture #1), and I can't pull the screens in. In addition, the retainer plungers are all breaking too (see pics 2,3,4). I am look for a better quality pull ... (cont.)

Yes, there appears to be a small notch (no greater than 1/32") around the circumference of the pin.

Does this 70-195 pin comes with a spring? Thank you