Viewing all customer Discussions for:

80-106 6' Sliding Glass Door Track

I have a vinyl patio door that was purchased at Home Depot about 18 years ago that has become very difficult to slide. I'm hoping you can identify the manufacturer and provide me with replacement parts to get it working properly. I would like to replace the rollers while it's apart. A rep sho ... (cont.)

Hi, My sliding glass patio door is hard to close. I suspect that this is because the track is cracked at the end. The track sags although the metal rod/cover in the middle is intact. Do you sell the parts needed to fix the track - it is about 1.75" wide (1 11/16") and 58" long.Thanks! ... (cont.)

These are the wheels from my condo sliding glass door built around 1965. They are a mess. I believe Lumidor Roller Assembly, 1-1/2" Concave BB Wheel Product Code: 81-019 is the right match and would appreciate a review and confirmation before placing an order. Also, would 6' Sliding Door Track Cover ... (cont.)

Good morning, the bottom rail for my Wasco Sliding Glass Door will no longer stand upright. As you can see from the photos, it falls to its side, prohibiting the door from sliding. Is the existing rail fixable, or does it need to be replaced or a cover installed? Thank you in advance for your hel ... (cont.)

I need to replace a track and wheels for a heavy screen door custom made for my 60 year old home. The doors are approx 4' wide each. My contractor says he can't find replacement but I think it can be done. I am sending pics of door here and would appreciate your feedback. Thank you! ... (cont.)

Hi! I have a VPI door that needs a new sliding door track that has been discontinued and VPI referred me to you. I see part #80-106 matches my dimensions but I need a 10' length, not 6'. Am I able to double up the part so it reaches the length I need? Thanks!

Hi. We removed these off of our sliding glass door and are looking for replacements. Also, do you sell the piece that goes over the top of the rail the wheels go on? Do we have even need that if we replace the wheels? I went ahead and ordered 81-004 from you with express shipping as our door is a ... (cont.)

Customer is not sure of the make but has Vision 2000, it was a Brandon home built in 1996. A metal piece showes WSIGCC CBA03. 3/8 inches tall x 5/8 inches wide - standard length for a sliding door.

Track is bent and breaking rollers the doors are 48 inches

My wheels and track are destroyed for my sliding glass door. The door was purchased from Lowes and installed by the contractor in 2020. The sales order info off the door label is 08720010 Another label contains : Atrium Companies, Welcome, NC (6022207): Product 332 vinyl sliding glass door w/fin & ... (cont.)

Wheel Diameter is 1.25 inches

The track for our sliding patio door has come apart creating difficult in opening and closing.We Do not know the manufacture. I can see that the cap has detached along the majority of the track.We need to replace it. The track is 92 1/2" and if fits in a 1 9/16" Chanel.Can you help up find a replac ... (cont.)

I am in need of a track for sliding door model Pella 072820M022171369. I have put a piece of wood in to hold the door in place.

Hi I have a double glass sliding patio door track.I replaced the bad wheels on one door but the door is getting stuck only when you are going to open the door.The track is worn out in the one spot that the back wheel sits on when the door is closed.Should I install track caps or duetou sell the bott ... (cont.)

All the info I could get off the tag . Aama sponsored. Code-1 spec SGd-b1-hp-40.

I am trying to find replacement rollers for my sliding glass door. Here is some info from labels on the door. ?Label on side of panel (note SGD = Sliding Glass Door) ?Series M-800/M-825/M-850 ?SGD-R20 ?MST-12069 (00X) ?Manufacturer Stipulates Conformity to ?ANSI/AAMA 101-85 ?M

Hello this roller is from a glass door inside of a 1998 Horton double wide. It appears to be all brass.I don't see any numbers on the roller or the door itself.

The bottom rail for our sliding door is broken and need a replacement part. Anyone can direct me to where I can get this part? The rail is 178.5 inch (probably a 6 ft length) x 2inch. The label says AAMM Series 8500, SGD-R20

I'm looking for rollers to be mortise in the bottom of hardwood doors (1 5/8"Dx39"Wx80"H) that weigh 120lbs each. I also need a 6'6" track that will work with rollers. I was looking at the 81-184 tandem rollers and the 80-106 track, but I'm not sure that the rollers will handle the weight. Any sugge ... (cont.)

This track supports 3 aluminum frame polycarbonate sliders. Total Length is 91". Track width for each door is .750" Doors ride on Swisco 81-246 Roller Assemblies