Viewing all customer Discussions for:

81-006 Keller Door Roller Assembly

Hello! We have two sets of these sliders, one of them the latch works great and the other not so much. It just doesn't seem to bring the latch up high enough to catch the other piece. They are very unique so would love to get them working, but it doesn't seem like I can access the latch hardware f ... (cont.)

I don't have any part numbers and I haven't found any names on the sliding glass doors. In image 7913, there is a press out that snaps into the lower frame of the sliding glass door, also the screw that adjusts the roller height connects to a nut inside of the slide housing.

I recently purchased the 81288(order#1522363) and there are some small differences that make them not work. The existing roller assembly is about 1 5/8ths tall, and the retention tab is even with the set screw(slightly higher). Other measurements including width and depth are the same. ... (cont.)

Need parts identified for replacement.

House built in 1970s. Sliders are dual pane Aluminum. Wheel channel is 0.25" and total wheel width is approx. 5/16 (0.3125"). Wheel diameter 1.5". Wheel bearings are shot and riveted in place. Thickness of the "carriage" is 0.75" and the side punch outs add about 1/16 (0.0625") on each side. ... (cont.)

Need to find this part

I have a sliding glass door. The handle and the hardware is broken. Specifically, the portion where the top screw is inserted -- in the metal hardware that's in the frame of the sliding glass door -- is stripped. I'm interested in replacing all components -- the handle and the inner and out metal h ... (cont.)

I need 2 rollers for my old sliding glass door,I provided you guys some pictures to help you find the right part that I need I hope hear from you guys soon..THANKS.

Need help finding these please help

guardian roller 18cfr1201

They were a little too big, on the height otherwise looks the same, 1 7/16" on the height have anything like that.

Sliding glass door roller home built in 1973 I need to replace all four rollers on my 6 ft glass door Thank You for your help finding parts!

Do you have this roller. I need 20 of them.

Please look at the photos and let me know if I can order the rollers with you. Thanks

any way to determine the make by looking at he lock assembly I need rollers and some locksets thanks John

Didn't see any identifiable numbers. 1980's South Florida home in Pembrooke Pines.

Looking for roller assembly for sliding glass door. see pic attached. There are no descriptions, numbers, or markings found on my existing hardware. Also looking for a rail topper for the patio glass sliding door. The existing rail is 9/16 in height Thanks.