Viewing all customer Discussions for:

81-030 Acorn Patio Sliding Glass Door Roller, 1-1/4"

I have a American Craftsman patio door kit I need rollers for. The roller body is 2-1/8" x 1-1/8". The rollers are 1-7/16". See photos. Can you help? Thanks Jim

Guardian rollers

(No content)

Looking for replacement

Acorn model #800/1200 31/8 Wheels 2 1/8 end to end 1 3/4 on center I need 4 rollers for door manf.by Acorn Building Comp. Dated 1976 I can add more photos or talk to a representative. Thank you.

I am looking for replacement rollers for a 20+ year Wasco Rolling Patio Door.1136 is stamped on the label. Don't know if that is a serial or model number.I forgot to get the width measurement - about 3/4 inch.Any help that you could provide to find 2 replacement rollers would greatlybe appreciated.T ... (cont.)

2 tandem rollers

1 1/8" rollers, Width 3/4", Height: 1 1/8", length 3 1/8"

I've included pictures with height, length and width. Please let me know your suggestions for replacement rollers.

Length 3 1/8" Width 11/16" Height 1 1/8" Wheels 1 1/8" Wheels are metal w/ball bearings Thanks Darren

Hello, firstly, i'm sorry for my english. I speak french but i try to explain my situation in english. I'm looking for change this piece of my door. When i look the inscriptions of my piece on internet, i fell here. Where can i find news pieces for my door? Can i buy them here? (i living in belgi ... (cont.)

Hi, We have two Dorwal heavy brown metal patio doors from 1974 which need new rollers. The doors measure approximately 48"W x 79"H x 1"D. Can you help us identify what replacement rollers we need without taking the doors out beforehand? Sincerely, Kristin

This is a roller out of my Reliabilt sliding glass door. It has a V marking stamped on one side (see photos).

Need this part.

I'm not even certain if this can be replaced. There appears to be no side screw that would hold the rollers in place. There is a screw on the interior of the door that raises the wheels. However, when I try to lift it out of the track, the wheels continue to descend (just gravity) making the door im ... (cont.)

I cannot seem to find rollers that match my current rollers exactly. The measurements of my current rollers are identical to the 81-030 rollover on your site, except the wheel diameter is 1 1/8 inch as opposed to 1 1/4 inch. I am not sure if the roller will work for that reason. My rollers have a ... (cont.)

Dimensions: 3/4(w)x1"1/8(h)x1"1/8(d) Wheel: Metal(2 wheels) Letter "V" marking on the side

I have a patio door manufactured by interstate window and door in pitrston pa. The rollers have bad bearings. The roller on the right is the original roller. It has a single mounting hole that fastens through top of roller frame into patio door. Do you have anything like this

Hello, We are struggling to find a replacement slider for our patio door. Dimensions are as follows: Housing- 4 9/16" x 1 5/16" Housing opening- 9/16" approximately Wheel diameter- 1 3/16" (approximately)

Good morning - a contractor told me I was going to need your part numbered 81-156SS to replace on my sliding glass door, as they could not get the door adjusting mechanism to work. Of course I did not take the door out to double check - but when I went to replace it... pictured you can see the part ... (cont.)