Viewing all customer Discussions for:

81-030 Acorn Patio Sliding Glass Door Roller, 1-1/4"

Need to identify what model of patio door roller I need to order? Width: 3/4" Height: 1 - 1/8" Length: 3 - 1/8" Two metal rollers per assembly Roller diameter: 1 - 1/8"

Hello, I need to find these two parts. The roller on the bottom of the door. Also need a new handle which has broken. Please see pics. If you can tell me what these parts are and where to buy them on your website would be much appreciated. Thank you, Joshua

Door size - 36" X 72" 1 fixed & 1 sliding panel. Door model, Jeld-Wen Premium Atlantic 3800 vinyl patio sliding door. I need to replace the roller assy. Jeld-Wen said I need to remove the full light glass to access the bolts that hold the roller assembly in place. The bolts screw into the top of the ... (cont.)

Looking for replacement rollers for American Craftsman sliding door

Hello,I need to replace the wheel truck on my ReliaBilt sliding glass door. The outboard bearing of one side is shot and my door sounds like there is gravel in the track, but it is perfectly clean.Width: 3/4"Height: 1 1/8"Wheel dimension: 1 1/8"Thank you,Nathaniel

Hello- I am looking for new patio door rollers where the measurements are Width ? .75 in. Height 1.1 in Wheel diameter. 1.25 in As you can probably tell from the attached photos, the wheels are metal. Please let me know whether you have replacements for these rollers. Thank you

i have a Ray-Dor slider. It has tandem rollers on both ends with the adjustment screw on the end cap. There are two phillips screws above the adjustment screw. I can't tell if this is what keeps the rollers in, or if they are held another way. I can't see how they are attached.

Hello, Would you be able to identify the correct replacement part based on the attached photos of these sliding door rollers? Please let me know if additional information is needed. Thanks, David

Looking for replacement parts

I have a sliding glass door in a home that was built in 2001 that has the Guardian glass stamp on the glass. I am hoping that you have the parts that are needed to get the door rolling again. Above I have sent pictures of the parts I need. I will need two bottom rollers on each side of the door, the ... (cont.)

I need to replace this double roller assembly on my sliding glass door Length: 3-1/8 Height: 1-1/8 Width: 3/4 Wheel Diameter: 1-1/8 Anchor screw is above the leveling screw. Both on the end. 2 metal wheels ** DOES THIS COME IN STAINLESS STEEL??

Roll assembly 5/8 wide and1 1/8 height and wheels are 1 1/2 dia. And are medal

can you send me guide to the job one side is stationary,

I am trying to replace the rollers in my door. I did not measure them when I had them out but the photos look like ones you have. Please let me know if you can confirm Thanks

"V" printed on side of roller housing. Purchased item 81-138 already and it doesn't fit. Measurements are 3 1/8 x 3/4 x 1 1/8 with a 1 1/16 diameter wheel.

I need help finding this part or one that can be used in its place please.

Roller has a V stamped on side of roller. Dimenions 3-1/8 long ,1-1/8 high, 3/4 wide,roller diameter 1-1/4

Hi, I'm looking for the roller assembly, not sure which part numbers are useful. Thanks!

I have used the 81-030 Acorn Sliding glass door rollers for years. The original screw I have that fastens the roller to the door is too large to fit into the threads on the glass door roller.What size/type of screw do I need?Steve

They are raised and lowered via a screw in the front of the rollers, I will need to replace both sets. Thank you, Nick