Viewing all customer Discussions for:

81-030 Acorn Patio Sliding Glass Door Roller, 1-1/4"

can you send me guide to the job one side is stationary,

I am trying to replace the rollers in my door. I did not measure them when I had them out but the photos look like ones you have. Please let me know if you can confirm Thanks

"V" printed on side of roller housing. Purchased item 81-138 already and it doesn't fit. Measurements are 3 1/8 x 3/4 x 1 1/8 with a 1 1/16 diameter wheel.

I need help finding this part or one that can be used in its place please.

Roller has a V stamped on side of roller. Dimenions 3-1/8 long ,1-1/8 high, 3/4 wide,roller diameter 1-1/4

Hi, I'm looking for the roller assembly, not sure which part numbers are useful. Thanks!

I have used the 81-030 Acorn Sliding glass door rollers for years. The original screw I have that fastens the roller to the door is too large to fit into the threads on the glass door roller.What size/type of screw do I need?Steve

They are raised and lowered via a screw in the front of the rollers, I will need to replace both sets. Thank you, Nick

I need to confirm the correct parts to order. Acorn Doorwal aluminum patio door from the 1980s, door model unknown. Dual rollers, trolley dimensions 3"long x 1-1/8"tall x 3/4" thick. Rollers 1-1/8" diameter steel. Top hole where the trolley attaches to the door is roughly 1.5" from the end.Also need ... (cont.)

I've searched for hours online and can only find steel versus stainless steel with the dimensions of my roller assy. My house is at the coast and steel will not last long. It's the same size as your product code 81-181 which has rollers to large and will not fit in my door. An help you can provide ... (cont.)

Hello All I removed my wheels from my patio door. As you can see they're rusted and can't move freely. I was wanting to know the make and model for a replacement set? I wasn't sure about going to HD and purchasing the over the counter brands? And there's a lot of different styles and variations. Ju ... (cont.)

I need replacement rollers and a lock for a glass screen door her 2 metal wheels and a metal housing there is and there is 2 screw holes on the outside opposite the wheels a screw hole in the middle on top and no brand name

Sliding glass door tandem Wheel diameter 1 3/8 in Length of part 3 in Body width 1 3/8

Information on header of door frame: NAMI 302187,make date 4/27/2018,sales order 08133347,warranty 33138035.bottom of tag "G". Frame height1 1/8, width 3/4, over all length 3 3/4,steel rollers, color, brass, roller diam. 1 1/8,axle 1/4x1/1/2,stamp front of frame near adj. screw is "V". ... (cont.)

Patio door rollers - I need a pair! These are 1-1/8 inch high by 11/16 wide, with 1-1/8" tandem wheels

Need 2 replacement rollers please see photos

Saar

We have a 1980's Acorn Dorwal Sliding Glass Door. The label in the door jam is completely worn out and unreadable, so I do not know the model number. It needs new rollers and the interior handle has been broken with no locking mechanism for over 13 years! We use the lock bar to stay safe. I do n ... (cont.)

Need two of these for a vinyl sliding door. Would like if possible to have them in stainless.

The doors are single pane regular glass in sets of three. The slider has double nylon wheels in a bronze colored frame.