Viewing all customer Discussions for:

81-057 Patio Sliding Glass Door Roller, Pan Am

I need help identifying and purchasing tge attached roller.

Hi; Just need to identify the part number on a sliding door rollers. I believe the door is made by Anderson company. thank you

The wheel is metal and the adjustmens screw goes on the top. I tried a home depot barton Kramer 457 it would work but it is .85" and the bottom of the door opening is .76" could mill it down but would rather have a direct replacement

Hi... we are looking to place an order for a stock of replacement glides for original glass sliders at an apartment complex. Attached are pics of what we need. Do you have something that will work, or is there any more info we can provide?

Need replacement wheels for my sliding glass door 1 1/2, 1 7/16 wheel by 5/16 probably due to constant wear 2 1/4 by 1 and 3/8 heavy aluminum frame on the wheel

The screw broke off taking the wheel out that's whatu see in the picture under the adjustment screw . The wheel housing is around 3/4 thick 2inchs long excluding the adjustment wheel plate and wheel.and 7/16 from top to bottom. It is a single plastic wheel but I'd be ok with a metal one.the wheel i ... (cont.)

Looking for a pair of sliding door rollers see photos single metal wheel. Looked local at box stores did not see a match

Hi can you help me identify this roller? 1.5 inch steel roller. The aluminum frame is 1 15/16 wide by 1 9/16 high. It says DISCO 1214 on the side. There are no other markings I can see Thanks

wheel is 1 1/2" diameter

Hello,I have made two orders now and I guess I should have used this process first but It did not seem like it was going to be this difficult. The first order I created was the closest to this part. Issue was that the adjustment screw was too low and did not line up with the hole in the slider. A ... (cont.)

I need 22 wheels for my sliders. This is a part rremoved from one door. Please send me a quote for 22 of them.

Hi, looking for this roller assembly, pictures are live so if you take the measurements they will be of the exact size . I would kindly appreciate you take the measurements so it will be more precise . This roller assembly just slides into a slot under the door , no need to screw it anywhere . There ... (cont.)

Sliding glass doors are old castle brand from 2004 screen door rollers are needed (2)

Hi looking for replacement sliding glass door rollers. The two pictures attached are the same rollers just showing all sides. The door is PTG Brand. Prefer the best grade of rollers available. Thank you

Wheels broken and track worn?2 4 ft sliding door unit

18 yrs old?Sliding living room doors do not slide smoothly? worn rollers (all metal) I also suspect that the rails are worn also, is there a way to fix that.?

What is the part number for these rollers? They are stamped "042N" and may be a PGT Sliding Door but I am not certain.... Thanks!

Thank you for taking my email. I couldn't find of what rollers I need and where to purchase them. I have few photos that I had from before and I hope that would help you. I you need more photos and measurements just let me know so I have to take the door out and measure and take more photos. Thank y ... (cont.)

No identifying marks on door. Handles were replaced prior to purchasing and 2010. Townhouse was built in 1999. These are original doors.

Please help me identify this broken assembly so that I can replace it!Thank you, Tim