Viewing all customer Discussions for:

81-133 Sliding Door Roller, Alcan

How do you replace just the roller , or does the entire bottom rail of door need replaced

I have no idea what the age of this door or hardware is. I have several pictures with measurements. I look forward to hearing from someone!

I need 14 replacement wheels

I need this roller assembly

Hi? I can't figure out which rollers I need for my glass patio doors. The rollers are in bad shape and need to be replaced. The wheel looks like 1.5". See attached photos. No markings found on rollers or doors.Thanks. Jeff

Do you carry this

Hey I would like to know how to get replacement assemblies for my sliding glass door. The door is a aluminum frame built in the 2000's. The roller assembly is 1.6" wide. 2.5" long. 0.75" thick. The wheel diameter is 1.6". There is no markings on the roller. Thanks for your time.

Looks like it has a t shape that holds it in place

Can you provide with a replacement that matches the images above.

good morning would you have replacements for the attached? door says Herculite K thanks Ray

Need to identify

Hello, these rollers are installed by removing the aluminum frame off the glass, and are just slid into position. The windows are alcan, and I assume the rollers are a 81-133, but not sure

Disco 1776

Need to identify what roller to replace on my sliding glass door. Can't find any manufacture information on the door. Roller assembly slides in from the bottom. It is a tolerance fit, not screw fastened. Length is 2 1/2 inches Hight is 1 9/16 inches Width is 6/8 inch (there are two wings that sti ... (cont.)

I'm not sure what brand of door I have. I need 4 of this type of roller. I have 2 doors to repair.

Reposting because I see a name and patent on the other side

I can't find any numbers on the parts. The rollers appear to be nylon. The bearings are rusted out and gone. These doors are old- maybe 1982?

I would like to confirm this is correct part Sliding Door Roller, Alcan Product Code: 81-133 My current roller measurements: Wheel width 3/8 Wheel diameter 1 5/8 Unit width 1 1/5 Unit  thickness 3/4 Unit overall length 2 5/8 without wheel

The door looks like an Old Anderson(not new Anderson). It is in Florida. Went to a parts place locally and they showed me the bottom rail of an Anderson. It was the same but didn't have the name Anderson engraved on the bottom rail. The assembly [mounted in the rail] is 3/4" wide and 5" long. There ... (cont.)

Your part # 81-133 seems to be it. Just wanting to verify before ordering 4 of themGary