Viewing all customer Discussions for:

82-209 "P" Tooth

No brand/manufacturer name anywhere on the door nor lock. Both the indoor and outdoor "faceplates" are 7-1/4" tall and 1" wide. The screw holes are 6-5/8 apart. The door is 1" wide. The latch hooks face in the UP direction.

Greetings, I have a 16 inside pull standard inslide lock on my sliding glass door. The hook that goes into the latch is not deep enough into the door to latch. As yom may see from the photo, the hook (tab, latch) does not extend into the hole barely at all. Is there a part I need to buy that ext ... (cont.)

The style is similar to your 89-003 model. I'm looking for a model with a longer nose projection. It needs to have approximately an additional half inch to catch the door lock.

I'm trying to replace the lockset on a slider that is larger than normal and am having a problem with locally available parts; specifically the hook on the replacement is not long enough to engage the keeper.I've included a picture of your lockset with a not and a picture of one of the other doors i ... (cont.)

Good Morning!My sliding patio doors do not lock. Upon further investigation, I noticed that the piece that hooks (lock cam) to lock the doors are missing, along with the screws to secure the lock cam. You can see in the attached photo where the screw is to be inserted. I was wondering if you can ide ... (cont.)

Just moved into the house and the latch that the hook would lock into on the inside railing is missing. It appears the 82-002 would work, but does the part come with the latch? Can I order the latch by itself? The screwholes measure 6.5"

wanted to know if the handle set came with all three different lock latches. the picture shows 3 different sizes we need one that is 3/8" Can you also confirm it has the 3/8" size lock thank you