Viewing all customer Discussions for:

84-016 Screen Door Roller, 1-1/4" Dia Nylon

I think I need both parts, the wheel and the corner insert. Photo 1 - good wheel in place 2 - old wheel, may be damaged 3 - both corners, good and bad

Hi! I am looking for a sliding mesh screen door. Color is light beige. Size 80 1/8X37 (edge to edge).It appears the black plastic knob to which the wheel assembly hooks to broke off on both bottom wheels. Please let me know if I can order an entire door or just need to replace the black (2) attachme ... (cont.)

trying to find replacement screen door rollers

Looking for four screen corner assemblies. All four corners are stamped with #11347 and T/M (in a circle). The reverse of corners removed from the top of the frame are stamped with "1" while the bottom rollers are stamped with "2" and have the long steel spring attached. Looking to replace two ... (cont.)

Hi, I've got a broken screen door wheel. The wheel is intact, but the black plastic housing that the wheel connects to broke. I'm not sure that black plastic piece comes out of the door, as it is in there tightly. Can that plastic part be replaced? Thanks, Mike

Hello Swisco, Nice to meet/find you. Wondering if you can help me? :-) Please let me know what additional measurements I can provide you so we can figure out what I need. I pulled these two out of (when viewed from the outside of my backyard sliding screen door) the top left and bottom right corne ... (cont.)

I am looking for an Amsco patio screen roller. They are off of a studio series patio door. According to Amsco, they no longer carry them.

Do you have this roller in stock?5800 Silverline patio door need roller for screenDan

Do you have 4 of these? also do you have secondary piece that holds the roller. In photo, it has the screws and I'm not sure if you have this part.

I am trying to find replacement for all four or eight of these rollers, it's a Jeld Wen Patio door. the ones on top are white and the bottom two are grey, (possibly installation instructions). If not available something they can be replaced with. I can use the ones on the second sliding door that we ... (cont.)

Roller will not stay in tack due to broken wheel. This is part of adjustable height screw that is connected to door. It looks like a black plastic piece is needed to allow the height adjustment and that piece looks to be broken.

Hi My wheel came off my door but as you could see one of the photos it looks like the part that it attaches to, snapped and is in the latch

The roller assembly matches all the dimensions to your Product Code 84-016.

1 1/4" Slider screen door roller

I cannot find any markings on the screen door or patio door frame. Can you help identify these parts and do you stock them? All four corners appear to be the same and screen door appears reversible. I need keeper for the latch as well but have reached the max photo upload limit and will have to su ... (cont.)

I need 2 corner 2 lower roller and 2 upper roller

Good morning, We are looking to replace the rollers on our 20+ year old Milgard sliding glass Screen door. Thanks for your help.Peter

The measurements seem to be: Roller diameter: 1 1/4" Roller width: 3/16" ? Entire assembly length: 2" Entire assembly width: 3/8" It seems to be very close to: 84-016 or 84-104 But the wheel width seems a bit off, and there don't seem to be hooks on these models, they have some sort of closed hoo ... (cont.)

I own a Quanex Series 1580 screen door and would like 4 new roller assemblies and brackets. Could it be Part #20.70.00.1387?

Trying to replace my patio screen door rollers and have been unable to get the replacement rollers to "click" onto the attachment point in the bottom of screen door. After many attempts I noticed that the older roller unit that I'm trying to replace has a longer extension from the base of the roller ... (cont.)