Viewing all customer Discussions for:

84-083 Columbia Door Bottom Roller, Metal Wheel

To whom it may concern,I recently purchased item # 84-094 with Order # 1665557. Unfortunately the rollers did not fit the Pella Sliding Screen door. I am looking for a roller as shown in the attached picture. Roller diameter is 1". The slot the slider mechanism fits into is 1-3/8". Can you help me f ... (cont.)

Trying to find top and bottom replacement rollers for this exterior sliding screen door. There is a plastic assembly that fits into the bottom (and top) of the door and holds each roller in place. I can't easily remove this plastic assembly.

Have not been able to source these anywhere.

This is to an oversized screen door , can't find the make and model number on the door ??

The 2 sliding screen doors are 18" x 76" each, and are adjacent to french doors. They have no brand or model info on them, and are at least 20 years old. One of the assemblies has failed -- the plastic pins holding the metal wheel have broken. These assemblies are internal to the doors. The screw pr ... (cont.)

I am trying to see if i can send you a picture of the wheel.

There are no screws attaching the rollers to the frame.

I need 4 replacement rollers.Ron

I have a Guardian patio door model: 8000 933 1/8U 16 OFR 1201 II CAN OG8B/12.1-M I'm looking for a replacement for the screen door roller assembly. I have measured and all the dimensions match your product code 84-138 EXCEPT for the screw hole measurement. My screw holes are 2 inches apart as opp ... (cont.)

do you have these parts

I am in need of replacement wheels for my screen door. The holes are approximately 1 3/4" apart.

Sirs, Purchased the rollers you see in the pics from you, I ordered the 84-020 (pictured) and they are about 1/8" to wide, I applied for a RMA. Can you get me the right ones. Not sure of the brand of door. Mike

The Columbia 84-064 looks like mine except mine is a top roller and doesn't have an adjustment screw. Do you have a repalcement ?

I have pictures but the Add Photo button is not working. The roller is quite similar to 84-151 but is 5/8' wide and has a metal wheel.

There are two spring-loaded roller cartridges recessed into the bottom edge of the screen frame, and two more in the top edge. The screen frame is one-half inch thick. Cartridge dimensions are: 1.375 x 1.25 x 0.312. Inches. Or 1-3/8 x 1-1/4 x 5/16. Inches Excluding the protr

Looking for replacement rollers for A?C #5500 Patio Door Screens. Thanks

Will your 84-083 fit our 30" IWC patio screen door? Thanks.

This is a white sliding screen door. I'm guessing it is close to 17 years old. The roller configuration appears to be very similar to adjustable Unique Home Design doors sold at Home Depot. There are no labels or markings on my door. I placed the part above the roller assembly so that you could ... (cont.)

I am sorry but I have no brand name for these rollers. There are four per screen door which has a plastic frame. That is about all I can tell you.

Looking for a replacement (metal roller) for a sliding screen patio door. The manufacturer is Unique Home Designs. The door is the Ultimate White Vinyl Sliding Patio Screen Door.