Viewing all customer Discussions for:

90-021 Pan AM Window Lock, 1-1/2"

Desperately need to replace these window locks/clasps. The holes drilled are 1.5 inches wide. Windows were installed in 1989 and sun has taken its told. Metal is brittle and broken. Need replacements for 15 windows. Please advise--I have not idea who the original manufacturer and neither does m ... (cont.)

the lever that locks the window has broken off. I removed the part (in the photo) and i need a new one, two if you have them. the window is from 1978, it is a single hung aluminium window bronze in color.

Nothing is printed on these latches. They are metal and mounted in the center of the window.

I need replace my lock

We have single bypass windows with a latch that works like sash window locks except they are on the vertical. The distance between the screw holes odd about 3/4" or 33mm. Do you carry these in bronze?

Trying to find a replacement for these locks. The handle side is 2 inches long by 3/4 inches wide. The hook side is 3/4 wide by 1 inche long. These are windows in old military house built in the early 60s.

Sash Lock is 1 1/2 from center of hole to hole The keeper is 7/8 center to center of hole and the square inside is 1 x 11/16

Hi, we have a broken window latch, the base measures 1 1/4 between the holes. The base is angled slightly towards the hook. The sweep/scoop latch broke off the base. I took another photo of a different one in the house to show the full latch hardware of a non broken piece. The reach is about 1" I t ... (cont.)

Old aluminum windows in Florida.Need balances and latches and some keepersMy research on your site indicates my balances (for 48"x48") single hung sashes 24" Series 351 (metal channel is 24" long w/o bottom or top nylon fittings) No wings top or bottom.Also the latches appear to be 90-031 although ... (cont.)

I am needing a replacement latch for an older Kinco window. I saw a photo from another post showing a number 90-021 part that looks like the one I need with one exception. The part I need has a 1 1/4 inch placement between screw holes. Do you have the part I need?

I am looking for this type of window sash

I need half a dozen window cams like the one in the photo.Also note my email account has changed to:

Hello, I've sent several pictures in order to see if you might know what brand of Windows I have and to identify the two forked brackets that are screwed into the window frame on each side of the sash. What are they called, and what do they do? I really appreciate any information you can give me. I ... (cont.)

i need to order the correct lock. i need 2.

Curved aluminum catch, for swivel lock, held in place by 2 screws attached to the top pane.

The holes are 1-1/2" apart. Can you offer any suggestions?

Need 2 sets of these that are mounted to the front of the window.

Chanel size .58 and Ft/Bk .63 inch. Need 24in #2320 qty6+ 25in #2420, qty 8+ 18 3/8in #1820 qty 4+ 23 15/16in #2310 qty 2+ also need On glass window frame. stops for channel Balance 2+ left.. 2+ Right.. Kinda of L shape with reinforcement. I need to send pic. and Stops for channel balance ... (cont.)

Looking for window latch from 1970 time frame.

photo above