Viewing all customer Discussions for:

90-021 Pan AM Window Lock, 1-1/2"

photo above

Uriel

I have sliding windows that were originally installed in the early 80's. I am in need of replacements for the sweep and lock. The base for the sweep is mounted to the window by two screws centered at 1 1/2". Will advise qty when identified, but less than 8.

We are looking for the replacement latch with the toggle that attaches to the top of the lower window. The distance from hole to hole is 1 5/8 inch.Thank you, Ellen

Im looking for these replacement parts on my 70s style sliding windows. The hook latch part is 3/4 inch wide by 1 1/4 long. The latch swivel assembly has 1 3/4 base with 1 1/2 mounting hole spacing.

Do you have replacement window sash locks for these older sliding glass windows? How much would they be? Depending on the price, I would need 5 to replace the missing/broken one or potentially get 8 so that they all match. Thank you in advanceVerla

Hi! I'm looking for the latch part of the images I uploaded. I went to Home Depot and they have nothing. The house is old and the windows are super old!! Any idea on what type of part I would need for this?

Let me know if you have this latch or one close enough that will work.

comes from a pan am window, if that is correct

Hello All the local hardware stores have the front piece with the handle. No one has the small back flat piece which fastens to the upper bottom window with two flat head screws 3/4ths inch apart. Thanks, BAH

Window latch is missing actuator. Can I get replacement, or new latch assembly? if so what type? Thanks-Howard B

There is a twist top to this that twisted off. I need to replace it Clay

I am trying to replace the window locks that are broken on two of my existing double hung vinyl window. The dimensions of drawings are approx. I do not need or want to replace the keepers. I also was unsure how to remove the locks from the sash without drilling out the existing fasteners. They don' ... (cont.)

I purchased the 90-021 and it worked fine on my slide window on the right side of my picture window, however it does not seem to work for the left window, is there a right and left model for the 90-021? The unit I have will work easy on the right side slider window but it does not match up to this ... (cont.)

Hole to hole 2" Might be Efco double hung windows?

I need the latch a Gapco Window. Can you assist in verifying which latch I will need? Thank you!

Need window lock, for aluminum frame window. I believe window manufacturer is pan am. Windows were made about 1975.

I need 4 sash and keepers similar to the two photos I just uploaded. The screw holes are 1 1/2 inches center to center. Thanks. Kevin

I have a sash lock on one of my windows that the handle broke off and several more that won't latch due to one reason or another. I'm looking for a replacement to these. the Lock is 2-1/8" long with 1-1/2" center to center hole placement. the Keeper is 1-1/8" long with 3/4" center to center hole p ... (cont.)

Trying to find something that will work to replace these old window locks - windows are sliding windows