Viewing all customer Discussions for:

90-077A Window Lock with Alignment Lugs, 2-1/16"

Hi I need latch replacements, but not sure which one is it. Please help.

1. Window Lock - Entry guard, Truth, U.S pat 268.643 2. Tilt latch P54, P55

Can I get replacements for these latches? Some of the existing ones have broken.

Lock number is 45226. Latch is 1/4" thick.

I need to replace 10 window latches in a condo built in 1991. I found ones with the same screw spacing and depth, but the new latch would not close. Apparently the cam reach was too shallow. I believe the hole spacing is 2 1/16" and the backset is 7/16".

I am looking for replacement sash lock keepers for vinyl windows. Existing sash lock is stamped "Acer Industrial Ltd". Distance between screws is approx. 2 & 1/16"

Windows are are probably 25 years old. Please advise what your product number is I should order. Thank you

I am looking for these sash locks. Hole spacing on the keeper is 7/8"Hole spacing on the operating part of the lock is 2 1/16"

Looking for a replacement latch for a Milguard window from '95 or '96. Looks like the distance between centers of holes is 2-1/16" Holes look to be 7/16" from inside edge It doesn't have alignment lugs

Have you got a couple of these?

Can you please provide the part numbers for my certainteed windows Per the attached photos. Thank you,

I'm looking for more of this keeper. Do you carry this style. It's from a Lang window. The sweep is 2" from hole to hole, and the keeper has oblong holes from center to center 2.25".

No marks

Can you identify the brand please?

Both window balances 29DS 38 window latches are broken off missing 9 balance stops

#A-S 9010

Distance between screws 2 1/16"

2 1/4 " center of screw holes

Holes measure 2 1/4 inches White Round White Vinyl Window Double Pane with Inserts 6 sections bottom, 6 on top