Viewing all customer Discussions for:

90-177 Truth Window Lock Keeper, 2-1/16"

Hello, I ordered window locks from you, but they were too large. I need these very narrow ones that the lock rotates into. I also need the keepers that unlocked the window for inward tilt. The one in the picture is still in place the other ones have broken and fallen out so I took a picture of the ... (cont.)

The silver latch has a 3 on it with 06 and 20 if you look closely. On the latch that goes up and down to lock has the number 21. The whole part itself has a 06 and 19 on the casing itself. Thank you and I hope I got you enough information.

Hi I need latch replacements, but not sure which one is it. Please help.

Can I get replacements for these latches? Some of the existing ones have broken.

Lock number is 45226. Latch is 1/4" thick.

I am having a problem finding the correct size.

I need to replace 10 window latches in a condo built in 1991. I found ones with the same screw spacing and depth, but the new latch would not close. Apparently the cam reach was too shallow. I believe the hole spacing is 2 1/16" and the backset is 7/16".

I am looking for replacement sash lock keepers for vinyl windows. Existing sash lock is stamped "Acer Industrial Ltd". Distance between screws is approx. 2 & 1/16"

Can you please provide the part numbers for my certainteed windows Per the attached photos. Thank you,

I'm looking for more of this keeper. Do you carry this style. It's from a Lang window. The sweep is 2" from hole to hole, and the keeper has oblong holes from center to center 2.25".

Can you identify the brand please?

Distance between screws 2 1/16"

2 1/4 " center of screw holes

Need sash locks for these windows what is part # thank you.

I have 2 window licks that need replacement and have attached the photos. First 2 photos are the same lock with Daco printed on front. Last picture was a previous replaced lock. Looking to replace both of them

What are these called & do you carry them - I don't like their condition and would like to replace them (6)

I'm describing it incorrectly. The photos show the existing hardware. But. On the fixed section of the window to lock the window is missing. Painter must have not put them back into place. My client can't lock those windows. I'll need 2

The latch part that the swivel thing goes into is broken. I don't know if you have a replacement that would fit?

Window is a Milgard slider installed in 1998 Latch dimensions 1" wide x 2 7/8" long hole layout 7/16" from face-- 2 1/16" between holes Latch plate 5/16 wide x 2 13/16 long 2 1/16" between holes

Looking for replacement locks for DH Vinyl windows. Thanks