Viewing all customer Discussions for:

95-105 Window Corner, LH

I have a custom made door which has a middle section with screen that also has a glass panel which is adjustable over the screen area. The latches and springs are needed for both the right and left side.I would appreciate your help to find the necessary replacement parts. Thank you for your help. A ... (cont.)

The sliding bolt is with the handle on the picture, but I don't need the handle, just a straight one. I chose the best I could, sine I couldn't fine exactly the same as mine, but I hope those will work fine

Could you possibly match this part for me. It is a corner swivel key for the screen on an old aluminum storm window. As you can see, one arm is 2x as thick as the other. Also the tab is broken off. Thanks.

This part broke. Do you have a replacement? Thanks, Jeanette

I do not see any in parts search. I have a bunch of screens to repair, please help! Thanks Peter

I'm looking for window screen corner keys that would fit a screen for a Quaker Windows & Door (Brighton Series) window. The existing corner key is 4/16" tall, 3/16" wide, 1-4/16" long and appears to be made of aluminum or zinc.

I need above parts I add in this photo. Please advise. Thank you.

I have an older Storm window with 1/8 Thick Glass. The two corner keys have broken off the bottom rail. I have identified them as 151 and 152 Left and Right off set corner Keys respectively. The bottom Leg appears to be 1/4 x 1/4 at the thickest point and the vertical Leg appears to be 1/4 x 5/32 at ... (cont.)

This corner key has the number 330 and below the number there is a letter "X". I'm guessing the number is the size of the corner key.

Hi, Any idea what part this is? its for a screen that has the pull in clips to raise and lower it at the bottom if that helps. Thanks!

I am looking for a Tilt Key in the same dimensions as your Window Corners (95-105 and 95-106). You can see in the photo that the upper leg width of my broken Tilt Key and the SWISCO Window Corner are both 1/4". The other leg of my broken Tilt Key is 5/32" exactly like the Window Corner (95-105) that ... (cont.)

Latch and corner key to be one assembly. In picture, there is a number 3 and a shield with UHH (?) inside it. Hope you can decode and replace. Thanks, --kevin

Dear Sir/Madam, Please find attached photos of the aluminum window system for which I need replacement corners, as some of these have fractured. The brand name on the window latch is Filco. One leg of these corner braces is held in position with a small screw (pictured). The screw hole is drilled ... (cont.)