Viewing all customer Discussions for:

95-182 Sears Tilt Pivot

Looking for replacement corner guides for our combination windows. They were put in back in 1980s and we have lots that have broken over the years. Thank you

Hi, the plastic pieces holding the tops of the storm windows in place are mostly all busted, so the storms 'slip' down. The windows themselves are TwinPane1982A. The storms don't have any markings on them, but they are from the same time period. It seems like a simple enough plastic piece, with a si ... (cont.)

Have this window sash

These plastic gizmos are at the top left and right corners of glass panes which slide up and down in tracks on our screen doors to turn them into storm doors in the winter. They are 1 inch in length. Some have broken, so need replacements. Please see attached files. Thanks, Richard ... (cont.)

I use the same corner pivot 95-182. Can someone tell me what the piece on the side of the window between the pivot on top and the locking latch on the bottom is called? It helps secure the storm window in the runner. I have quite a few broken ones that I would like to replace. Thanks John ... (cont.)

In the upper corners of my storm window, there is a plastic piece that attaches to the storm window frame with one screw. The plastic part has a flange (like an ear sticking out) that runs in the frame's channel. On a few of my storm windows, these flanges have snapped off and I would like to replac ... (cont.)

there are two small plastic clips at the top of the window pane that keeps the window in the track as it slides up and down.

Looking for this part anywhere, thought you may be able to help with the image I found.

The little clasps are broken so that our window can not stay in our screen door with out falling out.

Dear SWISCO I need to replace a broken top tilt for a storm window panel manufactured by Season All. The photos show an unbroken part. (Note that the fixing screw is backed out in the photo of the part installed.) The part is probably made from pot metal and is 7/8" long. The center of the scr ... (cont.)

Hi, I am looking for an aluminum storm window corner with tabs. I don't find an exact match by searching your website and was wondering if you could look at the attached photo and advise me on what item might be a suitable replacement. I need 100.

These are on the top corners of our Storm Windows. The small screws that hold the windows together in each corner are threaded thru them (see small hole on second picture). The little round points keeps the top of the windows in place in the metal frame. Please help me identify these parts, no idea ... (cont.)

Are these available ? I need at least 8 and a few more as spares. They've broken to to aging. I have the screws.

Some of my storm windows have broken guide pins that need replacement. I don't know the manufacturer. The storm windows were installed almost 20 years ago. The frames are black metal.

Nylon corner pivot with one screw hole

Would you have any of these storm window

Can you tell me how I can buy 2 Sent 2pictures Do I need to remove one

1 inch by 1/2 inch piece

Seeking a plastic guide that fits into a track on the side (at the top) of a window that itself fits into a metal storm door of unknown manufacture. The attached photos show the part itself and how it functions on the door frame. The part slides into a channel on the side of the window frame and is ... (cont.)

Hello, Looking for this replacement part for window/screens. Approx 35 years old. Inside of part appears to say 1165. No other markings on part or window. Not sure of MFG.