Viewing all customer Discussions for:

95-186 Screen Insert Corner With Pull

These are on all the windows of the house. About 20 years old. The measurements are just a little bit off from your listed products, so I wasn't sure.

Please see the attached pictures. Do you have a pull tab with the stop on in at the corner? If you do and have these in a blue white, I am ready to purchase right now. I would be looking at purchasing 5,000 of each of the corners and the corner springs. No. (Suggested 95-186 and 95-218.) If ... (cont.)

Nick with post glass and mirror do you have these??? The Width of the Screen Corner is 5/16" Wide.

Can't seem to locate anything that looks like this corner. What other options are available? The frames are approximately 15 years old. Thanks for your help. Ron

Do you have one inch plastic screen corners?

The square is 1 in. and 1/4 inch thick. Image #9850 shows the broken piece - piece broke off into screen frame.

HI, i purchased size 95-186 but they are a little too large. (Screenshots attached) is there something a little smaller i can try so i can fix my broken screen tabs when i rescreen? the worn looking ones in the pictures are the current ones and the newer ones are the 95-186 size. for comparison. ... (cont.)

There are no markings on theses corners. They are from screens on Silverline single hung windows circa 2002-2005. Note the exposed corner dimensions of 7/8" . The frame is 5/16" x 3/4". Would also like to have corners with lifts as well. I think they may have been out of production. ... (cont.)

Need 7/16 with 7/8" corner. 7/16 x 3/4 doesn't work. Makes it too skinny.

I sent you an email yesterday with questions about window parts. As I found out the pull tabs on my screens are brittle and break off when I try to remove the screen. It looks like item 95-186 will replace the ones I have. My question is how to get the old corner out without destroying the screen ... (cont.)

Do you carry a corner like the 95-186 and 95-187 that would better fit a .170 spline. Thanks, Joe

The left side is 95-186 need right side

I'm sorry I can't provide pics of it installed. Customer came in to only request the corners.We can't seem to locate these corners anywhere. Do you have a corner compatible?

My Silverline windows date from 2001. I need screen corners for casement window screens. I also need upper screen corners with the square pull tabs for the double hung windows. I'm also looking for the correct tilt lock tabs for the double hung windows. Thanks in advance

1.screen corners2. Sash pivot bars3. Tilt sash locks r&lDon

Dimensions similar to #95-186

From simington screen. Frame 1/4 inch track.

We have several little clips that are broken on our screens. Do you have replacements for them?

I need the following screen repair parts: cross bar clips, they look like your #70-006, but need to fit a 3/4 wide, 3/16 thick cross bar. Photo attached. Butterfly clips that fit screen frames that are 5/16 x 3/4. Photo attached. White insert corner pulls "with stops". They look like your #95-186, ... (cont.)

Look for screen corners to match Thickness 3/16 1"x1" square corner with a spline insert