Viewing all customer Discussions for:

95-187 Screen Insert Corner

I have some screen frames from about 2000 the plastic corner clips have disintegrated. The square corner is 1" clip length 1"1/4 in addition to the 1" corner. Total of 2 1/4" I tried getting screens made however they aren't sturdy enough and 2 screws have to slide eg aren't fixed in place so window ... (cont.)

I'm looking to replace broken window screen corners for a 5/16 inch frame. The corners themselves are 1.25 inch square, as you can see in the picture. Do you carry corners for 5/16 inch frames that are this size?

I'm looking for replacement corners for Simonton Screens.

I am looking for this screen corner and bought 95-187 and it did not fit.

4 very thin connection, spline track 90 degree corners.

I'm replacing 90% of my window screens and am trying to locate the correct screen frame corners to replace the ones that are loose/missing. If this particular style frame corner is no longer available, is there an alternative that will fit? There aren't any visible part numbers or markings that I've ... (cont.)

Seeking screen corners that fit very old windows. 3/16 opening on frame. No visible markings.

I'm looking for two screen corners ,? I tried your 95-230 but they were slightly bigger than the frame. Like 1/16 too much for both dimensions to fit in the aluminum frame.

Attached are the window corners. The window brand is Simonton Pro finish single hung

I'm looking for this specific corner

looking for this screen corner

Do you have one inch plastic screen corners?

The square is 1 in. and 1/4 inch thick. Image #9850 shows the broken piece - piece broke off into screen frame.

Looking for a screen cut corner that matches the Screen Corner Latch with Pull, 7/8" x 5/16"product code 95-218. Tried product code 95-031 but that did not work.

I currently have Owens Corning Luminess 400/PRO windows, I am not able to find the corner support piece for the aluminum screen locally. See picture below. I would like the part Number and price as I would like to purchase approximately 20 of them if available. Thank you.

There are no markings on theses corners. They are from screens on Silverline single hung windows circa 2002-2005. Note the exposed corner dimensions of 7/8" . The frame is 5/16" x 3/4". Would also like to have corners with lifts as well. I think they may have been out of production. ... (cont.)

Do you have the SilverLine screen parts in the pictures. The corner pieces with the pull tabs are labeled 842-2A, 2B, 2C, 3D. Need both sides of this part and also both sides of the bottom corner pieces. (See IMG_4391.Let me know if you carry the replacement parts and I will let you know the quantit ... (cont.)

Do you carry a corner like the 95-186 and 95-187 that would better fit a .170 spline. Thanks, Joe

Hi - attached photo is a broken window screen corner from a BF Rich replacement window. It is for a 5/16 channel but it is a double channel frame if that makes sense - so the corners measures 1 inch. I can't seem to find any of these - can you help?

I am at a loss & could use some help! I am looking for a window corner that fits my screen frame. I purchased a 5/16" that is too wide. Any help / recommendations would be appreciated!I'm thinking I should go with a 1/4" ?