Viewing all customer Discussions for:

10-127 Sliding Shower Door Bottom Guide

Bottom parts for 2 sliding shower doors.

Our house was built in early 1970s and still has the original shower. We plan to remodel the bathroom in a couple of years. In the meantime, I would like to address one problem with the 2-panel sliding shower doors. As the photos show there is an aluminium bottom track with 2 channels. overall width ... (cont.)

im looking for 4 of these

This is a three door sliding door shower, the long piece its about 2 inches long and goes inside the bottom door, its completely inside the door held by a screw on {the picture} and the hook or what hooks on the frame like a ninety degrees hook, goes in the Side bottom track.

how to replace 10-127 on the shower door. They are all missing. Thank You.

Hi, I could also use some help on how to attach sliders on bottom of glass doors. I totally forgot because it's been a few years since i have had the doors off. I do have the rollers on the top of the doors, so i guess i'm set to go there. Just not sure how the bottom sliders go. If there are on lin ... (cont.)

Looking por hardware parts for sliding bathroom door

Hi I am looking for a Sliding Shower door bottom guide as per the attached picture. I am hoping you have something compatable. The original ones came with an install of a Mirolin door. The part is approx 1 1/4 inches long x 1/2 inch wide. Thanks for your time. I look forward to hearing ... (cont.)

Could you please identify this sliding shower door clip and advise me on which one I should buy from the website? Please let me know if there is any other information you need. Thank you in advance for your help

Do you need to drill a hole in the aluminum so the pin could go in through the aluminum? Does the pin go through the aluminum? To be clear does the pin go through the plastic on one side then through the aluminum then through the plastic square on the other side? Thanks for any help you can give me. ... (cont.)

I have no clue what it is. Its broken, so there is no way I can detatch. Appears the plastic guide was screwed in w/ zinc screw and its rusting out. Please help!

Lower shower door glide. Need the missing push pin to keep glide attached to the door.

My shower bottem guide is about 2 inches long and half in. tall. This shower was bought at Home Depot maybe 10 years ago and they don't make or store the part at their stores. The guide is about one fourth wide. Please let me know if the picture you show for the 10-127 is the same one that I need ... (cont.)

These clips appear only on the inside door of my shower. I think I have found them on your website, but wanted it she sure if you could confirm the part # please.

Sliding shower doors installed early 80's. Think they are sterling. Bottom of one 29" door bent after a fall and guides are broken. Part 10-127 is the right style guide and the measurements fit. Is it two guides per door? Also, I don't know if the bent part (sweep?) can be unbent or if that unscrewa ... (cont.)

I have a set of shower doors that were installed in probably the mid 1980s Im guessing, and 3 of the 4 bottom guides have broken off and its become a real nuisance. The bottoms of the doors swing in and flop around, and sometimes cause the top rollers to fall out and there goes the door. The plas ... (cont.)

Good morning, I need lower guide/bushings for bifold closet door lower sliding pin. I have attached an exhibit for reference. This is not for door pivot hardware. It is for the sliding portion of the bifold door which rides in the lower track. I also need a pair of shower door lower clips. Is ... (cont.)

How many are in a package? Is it one to a package or are there 2? Product Code: 10-127