Viewing all customer Discussions for:

23-001 Front, 1/4" Offset Door Roller, 3/4" Dia.

I have an existing closet door requiring new rollers. It looks like a 3/4-inch Dia roller because 7/8-inch roller is too large for the track. It approx. 1/4 inch offset. See picture below. The diameter of the will is approx. 3/4 or 5-6/8 dia. a 78 inch dia which is too big Thx

This Swisco door hanger (product code 23-047) is almost what I need. This has square profile nylon wheels, I need this hanger but with a rounded wheel. Can you help? Thanks, gp

Looking for a replacement for this heavy duty closet roller bearing made by Nordahl in Burbank, CA c. 1957. My door is old and very heavy. Thanks for your help! Steve

I have Leigh 1 3/8 rollers on my closet doors. I need replacement brackets but can't find the correct size in store. Are these still available?

This is from a set of doors that are hung. We have two other sets that need these exact parts. So I need 4 brackets total. I included a photo of the track which shows the slots for the wheels which are three-quarter inch size. The doors are 1 1/2 inches wide.

Hello Swisco group, Do you have the Leigh hanging closet replacement rollers? It has a front dimension of 1 3/8" and a rear dimension of 3/4". I believe the part may be number 77-28287. thank you, Linda

Please see attached photos. The roller assembly is stamped "A". Please email with questions.

Old roller is Leigh brand 3/4 inch wheels. Getting hard to find, no luck at Lowes or two local hardware stores. Found these Swisco replacements on a Google search. One of my solutions beside replacing rollers was to relocate them closer to door edge. If these don't hold up my next repair will be to ... (cont.)

I have several sliding closet doors that have failed to stay on tracks and with broken wheels. I suspect our builder may not have used proper rollers because some of them have different offsets. The metal roller part that attached to the doors rubbed against the doors. Can you recommend the prope ... (cont.)

I need to replace wheels on the top of mirror sliding closet door on a second closet. The pictures are of the closet door that works fine. My other closet front door needs gliders, do have something like This? Thank you Victoria

hello, i am looking for matching rollers to the one in the pic. it has a 3/4 inch wheel with a 1/4 inch off set. metal body is 2 and 5/16 tall and 1 and 3/8 wide. is this something you carry? thanks.

Sliding door roller made by Nordahl in Burbank, CA. The roller diameter is 3/4 inch. Need a pair, better even 4 pieces

My Father Inlaw's house has failed closet door, I need to replace one of wheels that has flat spots. The local big outlet stores don't have parts that fit. Their wheels are too thick or too tall... Thanks, Stephen & Lauren

Hi- I am looking for replacement for these sliding closet door rollers. The rollers diameter is 3/4" and width 1/4". The offset for the Back panel is 3/4" and Front panel is 3/8". Do you offer anything like this or have another suggestion that can be used in place of these? Thank you. C ... (cont.)

I have a Kenna door hanger similar to your 23-0051, but my hanger has a (3/4") diameter wheel. Do you have anything with a 1/8" offset and 3/4" wheel that might work? 7/8" diameter wheel will not work, I tried the 7/8 wheel size and it is too big. Trying to avoid replacing the track. ... (cont.)

Can you let me know which is the correct part to replace the one from the picture I submitted.

The posted photo from a 1970's house. All double doors. Offset looks like 3/8", length 2-1/2", roller dia 3/4". Marked "Kennatrack" and has a capital "B" with a circle around it. Can you help with a replacement part? I guess the alternative is to get a new track and roller set.