Viewing all customer Discussions for:

23-002 Rear, 1/2" Offset Door Roller, 3/4" Dia.

Sterling 3/4" wheel 1 5/16" wide 2 1/4" long 1/2" offset I need this wheel as well as its counterpart.

Top Sliding door roller with stamp code 21 003 looking for.Thankyou for searching for a replacement. Bruce

This Swisco door hanger (product code 23-047) is almost what I need. This has square profile nylon wheels, I need this hanger but with a rounded wheel. Can you help? Thanks, gp

I have Leigh 1 3/8 rollers on my closet doors. I need replacement brackets but can't find the correct size in store. Are these still available?

This is from a set of doors that are hung. We have two other sets that need these exact parts. So I need 4 brackets total. I included a photo of the track which shows the slots for the wheels which are three-quarter inch size. The doors are 1 1/2 inches wide.

Hello Swisco group, Do you have the Leigh hanging closet replacement rollers? It has a front dimension of 1 3/8" and a rear dimension of 3/4". I believe the part may be number 77-28287. thank you, Linda

Old roller is Leigh brand 3/4 inch wheels. Getting hard to find, no luck at Lowes or two local hardware stores. Found these Swisco replacements on a Google search. One of my solutions beside replacing rollers was to relocate them closer to door edge. If these don't hold up my next repair will be to ... (cont.)

Hi, What is the width of the wheel on 23-002? Is it 3/16" or 1/4" or something else? Thank you, Jennie

I have several sliding closet doors that have failed to stay on tracks and with broken wheels. I suspect our builder may not have used proper rollers because some of them have different offsets. The metal roller part that attached to the doors rubbed against the doors. Can you recommend the prope ... (cont.)

Hi I'm looking for replacement sliding door hangers for my house. The look exactly like this part - KENNA TRACK REAR CLOSET DOOR HANGER, 3/8" OFFSET 23-048 however my slider wheel is 3/4" rather than 7/8". Is there another part I can order that has the smaller wheel? Thanks, Adam ... (cont.)

My Father Inlaw's house has failed closet door, I need to replace one of wheels that has flat spots. The local big outlet stores don't have parts that fit. Their wheels are too thick or too tall... Thanks, Stephen & Lauren

Hi- I am looking for replacement for these sliding closet door rollers. The rollers diameter is 3/4" and width 1/4". The offset for the Back panel is 3/4" and Front panel is 3/8". Do you offer anything like this or have another suggestion that can be used in place of these? Thank you. C ... (cont.)

i just purchased your part 23-047 for my sliding door. the part does not fit as the flat edge nylon wheel is a hair too big! also, my wheel has an angled edge on both sides rather than a flat edge. i have several closets with sliding doors, and the 23-047 does not fit in any of the door slides (ag ... (cont.)

We have Lawrence Brothers bypass door hangers on our bedroom closet. On of the hangers broke. A trip to the local hardware store came up empty. They had a similar hanger however it has a flat-edged wheel. Ours has a rounded edge and the new one would not fit in the track.I was wondering if the 23-04 ... (cont.)

Hi, I need to find a replacement for the part shown. Do you carry it or know where I can find it? Thanks, Shannon

An image is posted above. We need 9 sets of these rear by-pass hangers for our Bifold doors. We have 9 doors all together. Each door base 2 of these hangers with a wheel on it. We just can't figure out what exact part we need. Hope the photo helps. Jeanne

I need to replace my closet door hangers (son lost the hardware when he removed the doors 3 years ago-love him!). What is the importance of the offset? Thankfully you have the 3/4" wheels, but I can't decide on the offset. What difference will it make? There are 2 sliding doors on the closet and the ... (cont.)

The posted photo from a 1970's house. All double doors. Offset looks like 3/8", length 2-1/2", roller dia 3/4". Marked "Kennatrack" and has a capital "B" with a circle around it. Can you help with a replacement part? I guess the alternative is to get a new track and roller set.

Attached is a photo of closet hanging door rollers in my kitchen. The offset appears to be 1/2 " and the rollers when new were probably 3/4". There are two rollers on each door and a guide on the bottom. My guess would be 23-002 but please let me know. I sent in another request earlier. Thanks for ... (cont.)