Viewing all customer Discussions for:

23-028 Mirror Door Roller, Concave

Many of your posts recommend P/N 23-028 as a replacement roller. I noticed my roller does not have the two tabs on the top of the roller that make a 90 degree turn toward the front. Will they be in the way during installation. Thanks

The following is the measurements I took to the glass closet door roller and bracket. Top left screw hole to top right screw hole on bracket 2 3/8" Bracket height 3" Roller thickness 5/8 concave Diameter of roller 1 1/2 Thanks for all your help

I am looking to replace a roller. Currently it is hard to push the door, but it does move. Not sure if I can replace the roller itself? Also not sure if the assemble can be removed since it appears to be part of the door.

Is this part available?

To whom it may concern, I need help in procuring a new bottom track for the Monarch Sliding Glass mirrored door. I have attached two photos, one of the track and one of the "wheel" assembly that rides in the track. I will follow this email with a telephone call.

Just inquiring which part this would be, Thanks!

This is the door roller for the 2 hardwood panel doors that came as a 3 door set, 2 plain and one mirrored.

I ordered rollers (4) 23-064 : Mirror Wardrobe Door Roller, Concave They do not fit. I have attached a picture. I believe the distance between the screws is 2 3/16 " I also ordered the top guides to replace the K guides. These are also not right. These doors have a wooden frame, and those guid ... (cont.)

I have Monarch rolling mirror doors. What do you recommend to fix my chewed-up rollers?

hi, here are two photos of the wheels I need. O.D of roller is 1-1/2" distance of the mounting holes, left-right 2-3/4", top-bottom 2-3/8 . the mounting holes are positioned at half the thickness of the bracket and the slider is 1-3/4 wide and 1/2 thick. I would be prepared to simply c ... (cont.)

I need several replacement mirror wardrobe door roller very similar to your Product Code: 23-064. There are some differences (e.g. my wheel is 1.5 inches) but the key similarity is the the ledge that sticks out to hold the door. I have looked everywhere but have found nothing that is as similar as t ... (cont.)

Attached are two images of a Charmac mirrored sliding closet door roller that I would like to replace. The main body of the item is 1 5/8" by 3" Thank you for your assistance. I look forward to your reply

My mirrored sliding doors appear to have 23-028 roller assemblies. My long-standing problem is that they have a stick/slip action but once enough energy is exerted to get them rolling, they glide easily. Dry or oily lubricants are ineffective at removing the static stick condition. I'm thinking may ... (cont.)

Please help. We have 2 mirror sliding g doors. Total width together is 60inches. We only have one wheel and no track. Can you help?

This assembly looks similar to your part # 23-028 (concave wheel). Width dimension of my part is 2 1/2" versus 2 1/4" with the 23-028. What replacement part will work best?

ello

I uploaded a photo of the part that I need to replaced.

Help!!!!! I am in need of the bottom track for our Monarch Oak Mirror door that goes on our bedroom closet. The length is 71 and a half inches. Total width of the track is 3 and one quarter inches. Each door is 3ft. 1 inch. The attached pictures are of the railing and the rollers. I hope that the ... (cont.)

Attached is a photo of the roller assembly off a sliding closet door. The door is a mirror if that makes a difference. The height adjustment screw hits the assembly right on the top, right in the center. Size is as listed on the photo.

Can you please tell me if you have this part. I need to replace four of them on my sliding mirrored doors. Tha