Viewing all customer Discussions for:

26-338 Sash Stop

Need 40EA, 26.5mm x 6.8mm opening

I found a recommendation on this site that the part 26-338 would be a fit for the Acroline window, but it's too tall and too thin.Dimensions of the hole are 5.2mm (0.204") x 25.25mm (0.994")

Do you have a replacement for this vent stop? I'm not sure if it helps, but it appears that the following parts you sell are the locks for our vinyl windows: Window sash cam lock with 2-1/16" installation hole centers. Base stamped: EntryGard TRUTH, U.S. PAT 268.643, 40264 U.S.A. ... (cont.)

Hello.I am hoping you might have available for sale, please, the following two items for Air-Tite wndows:- One lock- Four window "stops."Set forth below are (i) three pics of the lock and (ii) several pics if the "stop" (both the "in use" position and the "not in use" position). The first pic of ... (cont.)

I have double hung vinyl window with vent stops. The opening is 3/16" X 1-1/16" I am looking for replacements.

I am trying to find these vent latches for my windows. I I have attached a picture. If anyone can help me find them I would greatly appreciate it.

Please send 4 more 26-388 Please give me price

Double hung vinyl windows. What can I put in that channel on the right to stop Wind from coming thru.

I need to replace the security tab in my window

I have a number of Custom Gard Windows (Chelsea Building Products) which were installed between 1990 and 1993 and are in good condition but the Vent latch/stops have deteriorated and need to be replaced. Per the photos, there is a metal spring like tensioner on the latch. The front exterior length ... (cont.)

My Milgard sliding windows have two small spring loaded window stops that are above the window and prevent full travel when in the out position. someone has broken and removed the entire stops. What are these locks called and where can I purchase new ones?

There are two part The title window which is internal The window stop to keep the windows from being raised past a certain level I need this part ASAP, has the house is sol and I need to repair my 12/8/2018 Thank you

We are looking for replacement sash stops which we have ordered from you before. The part number on our previous order was 10-207 but in looking at that product it's not the same as we ordered and it doesn't come in white. We looked for other products but could not find the correct one. Any assis ... (cont.)

I think these are called vent latches for vinyl double hung windows. They can be used to prevent the lower window from going up all the way. They tilt out from the upper window. The pictures may have turned sideways. Do you have such a thing?

This is the piece that will stop the window from going any higher if it is pulled out It measures 5/16 inches wide and is 1-3/16" long.

Piece has a number 2 on left side as installed. Slot in window dash is one inch high by approximately 5/32 inches wide.

Hi Customer Service,I need 15 matching vent stops. Thanks, Joe

I have of few of these window stoppers that are Miss and we would to replace them. The windows were already installed when we moved in our home, would like to replace the ones that are missing and broken.

Almost all my vinyl windows are missing the pop out wedge that mounts on the upper sash to keep the lower sash from raising higher than a few inches. Seem to be 1" length. White. Daily Windows from years past. They sent me to you.

These break! My windows were from Window Wizards, who are out of business. I would like to purchase about 20 of these if I can find them. Dorothy