Viewing all customer Discussions for:

23-043 Mirror Door Roller, 1-1/4" dia.

Sliding closet doors, bottom convex rollers 1 1/4" dia. No markings on hardware. Looking for a replacement.

I am looking for replacement rollers for mirrored sliding closet doors

The pictures are of the concave roller and track from a vintage 1977 mirrored bypass closet door. The door is approximately 8',floor to ceiling. The roller actually slides into the bottom rail of the door frame. The flared sides of the roller engage with a small lip along the bottom edge of the fra ... (cont.)

Hi, Can I replace my steel roller mechanisms with nylon? I feel like that would make them quieter.

Hi, I have a 30+ year old bypass door track for mirrored closet doors. The doors are 8' tall. The track is 130" long and I think the replacement track would be 2 of the 23-272 tracks joined together. The wheel assemblies I am unsure of. I think they may be 23-092 or 23-232S. I don't think nylon whee ... (cont.)

Hi there, I am in need for a replacement for this roller removed from a mirrored closet door. This is a 1-1/4 inch nylon roller, the housing 5/8 inch wide but the flange is approx 15/16in wide. The housing is 1-3/32 inch high.Thanks!Steve

Hi there, I was looking at Product Code:23-043 on your website and it looks like the correct fitting for a replacement I need, however I wanted to confirm before submitting an order. A few weeks ago, I bought a replacement concave track from your company but I found that my current roller sits too ... (cont.)

I'm trying to replace rollers of 3x closets with these rollers types.

Hello, just purchased a 30 year old home with two sets of these Slimfold bypass sliders. Nylon guide rollers on the bottom only are shot. Looks like the assembly is all one unit. Can you help? Need 4 or 2 for each door on one set of doors. Thanks, Greg

Looking to replace the rolling wheel for a closet door. I already ordered (1) 23-095 Mirror Door Roller assembly convex and quickly realized I need the concave instead. Also the part I received is a touch larger than the one in the picture

Hello, I'm trying to find new closet rollers. Nylon wheel, approximately 1.25" diameter. 1.16" tall x .78" wide. Thanks in advance!

2 piece roller assembly. 9/16 wide, 1 1/4 roller #138-R on side

Looking for 6 such parts

We incorrectly ordered item 23-095 under order 1672469 and need to return and get the ones in the photos. Do you have? Thankyou.

I need 4 replacement wheels for my mirror closet doors. The wheel diameter is 1 1/4. There are no markings or names on the roller I removed. Anthony

I ordered replacement wheels because one was jammed and inoperable but the description didn't say the wheel was convex. Obviously I need a concave wheel for my particular track. Thanks, kathy

need roller and track

I tried replacing the wheel (which is 1-1/2" diameter), but damaged housing foiled that solution. Please let me know if you a=have suitable replacement part. Thanks!

Can you please advise on a replacement part for this ball bearing roller?--Thank YouMark

my current roller has the same measurements as 23-092, with a nylon wheel. My measure, wheel diameter 1/8, 3/4 flare, with 9/16 inches.The 23-043 diameter is 1/8 longer than my roller. Should I buy 23-092 or 23-043?For tha matching track 23-271.My door frame opening is 59.5 inch. Will 0.5 shorter th ... (cont.)